Carmarthenshire · Wales
Worktop repair in Furnace, Carmarthenshire
Damaged worktop in Furnace? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Scratches and knife marks
- Chips on edges and corners
How we handle worktop repair in Furnace
Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, matching the colour and pattern by hand. Nothing is taken out. Whether it’s damage from fitting or building work and dents and gouges, we can help, whatever the material.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Furnace (SA15)
- Area hub
- Carmarthenshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We clean up when we are done and tell you when it’s ready to use.
- We start by checking the damage and the worktop material.
- We clean the area and prepare the edges of the damage.
- We fill the damage with a suitable filler and build up any lost edge.
- The colour and pattern are matched by hand.
- The surface is sealed or finished to suit the worktop.
How to prepare
- Make sure the area is dry
- Keep children and pets away from the room on the day
- Make sure the room can be ventilated
Ask for a price
To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Advice
What we are called out for in Furnace
The worst damage frequently happens in a moment: a hot pan set straight down, or a heavy pan catching the edge. Scratches build up more slowly, from knives and grit.
Contact us if you’ve noticed any of these:
- A damaged sink edge
- Gouges in the surface
- Scorch marks from pans
- Knife marks
Questions to ask before you book
- What protection goes down before work starts
- How the colour is matched
- Who will actually do the work
- Whether the price is fixed and includes VAT
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Furnace: your questions answered
Are there extra charges for Furnace?
No. Our quotes include travel, with the same prices everywhere we work.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What does worktop repair cost?
Prices start from £95. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SA15 postcode.
What we cannot put right
It helps to know what we cannot do too:
- Failed support under the worktop
- Laminate swollen by water from underneath
- Discolouration deep in quartz
Send us pictures and we’ll tell you honestly.
Materials we work on in Furnace
- Quartz
- Laminate
- Solid wood
- Granite & marble
- Solid surface (such as Corian)
What affects the price in Furnace
Repairs from £95. A fixed quote means you know the cost before you book. We take into account:
- How easy the damage is to reach
- How many areas need work
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the worktop, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Watch the edges with heavy pans
- Keep joints and edges dry
- Use a chopping board
- Always use a trivet for hot pans
Leave the repaired area free of hot or heavy items until it has cured. After that, trivets and chopping boards protect it best.
A chip on an edge can grow, and on laminate, water can get into the core. Repairing it early stops that.
Places near Furnace
More services for Furnace
Repair or replace: which is better?
Stone and quartz have to be templated and cut, so replacing one section is a big job. A repair takes a few hours. Our worktop repair starts from £95. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- Colour-matched on site
- Straight answers about what a repair can do
- One price list for the whole UK
- CHAS and Constructionline accredited
Read our prices page.
Our work in Furnace
Furnace is about 1 mile north of Llanelli Rural, in Carmarthenshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Furnace is one of 195 towns and villages in Carmarthenshire where we work.
We cover every part of SA15. You’ll find streets such as New Road, Old Road and Cwmbach Road, and we cover them all. Other places close to Furnace include Stradey (1 mile west), Pentre-poeth (1 mile north-east), Tŷ'r-frân (1 mile east), Sandy (1 mile south-west) and Llanelli Rural (1 mile south). Within a short drive, we also cover Carmarthen (13 miles north-west), Ammanford (10 miles north-east), Burry Port (4 miles west), Betws (10 miles north-east), Pembrey and Burry Port Town (4 miles west) and Achddu (3 miles west).
Landmarks near Furnace
Our customers here include homes close to Stradey Arms, Old Road C.P. Primary School and Ysgol Gyfun y Strade. Other local landmarks include Millennium Coastal Park (1.4 miles west), Hall Street English Methodist Church (0.5 miles south) and St. John Lloyd (1.5 miles east). Furnace’s nearest station is Llanelli station, about 1.2 miles south of the centre. Well-known places in the area include Parc Howard Museum (within half a mile east) and Llanelli Old Castle (0.6 miles south). For a walk, there’s Pen Waun Twmpath and WWT Llanelli Wetland Centre.
Materials and what they mean for the repair
Solid surface
Solid surface materials are uniform throughout, so marks can frequently be sanded and refinished.
Wood
Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.
About our accreditations · Every repair comes with a one-year guarantee.
