Pembrokeshire · Wales
Worktop Repair for Narberth homes
Worktop repair in Narberth without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Damage around the sink cut-out
- Cuts and scratches in the surface
How we handle worktop repair in Narberth
Pan burns, chipped edges and knife scratches make up most of our worktop work. We repair them all in your kitchen. If you are dealing with gouges in the surface and damage from fitting or building work, we can help.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Narberth (SA67)
- County
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Steer clear of strong cleaners
- Use a chopping board
- Oil wooden tops regularly
- Always use a trivet for hot pans
Use chopping boards and trivets, wipe up spills promptly, and re-oil wooden worktops regularly.
Damage near the sink is worth repairing quickly, because water gets in and swells the board.
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- A cracked stone top that’s unsupported
- Severe heat marks in quartz
- Water-swollen laminate
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Solid surface (such as Corian)
- Laminate
- Solid wood
- Quartz
- Granite & marble
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Common questions in Narberth
Do you cover the whole of Pembrokeshire?
We cover the whole UK, including Narberth and the rest of Pembrokeshire. Send your postcode with your photos and we’ll offer you dates.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you cover Narberth?
We do. We send a technician to Narberth for every job, with no extra charge for travel.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Do I need to empty the worktop?
Just clear the area around the damage. The rest is covered and protected.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you repair a chipped quartz worktop?
Yes. We repair quartz chips regularly, filled and polished to match.
What does worktop repair cost?
Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Repairing versus replacing in Narberth
Even if you could get the same laminate, it may not match after years of light and use. We match the repair to your worktop as it is today. Prices start from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- A year’s guarantee on all work
- We will tell you if it’s not worth repairing
Take a look at our prices page.
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the entire worktop, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Narberth and nearby
Narberth (Welsh: Arberth) is about 10 miles east of Haverfordwest, in Pembrokeshire. Jobs in Narberth are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Narberth is one of 223 towns and villages in Pembrokeshire where we work.
Every address in SA67 is within our area, from the main roads to the quietest streets. From High Street, Station Road and James John Close or a nearby road, we can come to you. Narberth sits on or near the A478 and B4313, so getting to you is simple. We also cover the places around Narberth: Narberth Bridge (1 mile south), Templeton (2 miles south), Princes Gate (2 miles south-east), Broom (4 miles south) and Begeli (5 miles south). Further out, we also cover Haverfordwest (10 miles west), Milford Haven (14 miles south-west), Pembroke (11 miles south-west), Pembroke Dock (11 miles south-west), The Marsh (10 miles west) and Dinbych-y-Pysgod (9 miles south).
Local landmarks in Narberth
Locally, our jobs take us to homes close to The Ivy Bush Inn and Tabernacle Wesleyan Methodist Chapel and the streets around them. The nearest railway station is Narberth station, about 0.6 miles east. Further afield, we also cover the area around Narberth Castle (under half a mile south) and Narberth Museum (less than half a mile south). Green spaces nearby include Robeston Hill.
Also near Narberth
What else we do in Narberth
What we are called out for in Narberth
Most chips are on edges and corners, frequently when something heavy catches the edge.
People usually call us after spotting something like this:
- Chips caused during installation
- Damage around the sink cut-out
- A heat mark or burn
- Chips in quartz or granite
What to look for in a quote
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- How soon you can use it again
- What the guarantee covers, and for how long
Materials and what they mean for the repair
Solid surface
Solid surface materials are uniform throughout, so marks can frequently be sanded and refinished.
Granite and stone
Natural stone worktops chip at edges and around cut-outs. The repair is filled and polished to the stone’s finish.
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a morning or an afternoon, including clearing up.
- First, we check the damage and the finish we need to match.
- We cut back any burnt or loose material.
- We fill and shape the damaged area.
- We recreate the pattern, flecks or grain.
- We finish it to match the sheen and leave it to cure.
Getting ready for the visit
- Ensure the room can be ventilated
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
