Staffordshire · England

Worktop repair in Maer, Staffordshire

Chip, burn and scratch repairs to kitchen and bathroom worktops in Maer, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips caused during installation
  • Chips in quartz or granite
Surface Doctor technician repairing a wooden kitchen worktop

Book worktop repair in Maer

Maer and nearby

Maer is about 6 miles south-west of Newcastle-under-Lyme, in Staffordshire. We travel to homes and businesses in Maer and nearby villages, so nothing has to leave your home. Maer is one of 512 towns and villages in Staffordshire we cover. You can also see our page for Birmingham, about 37 miles away.

Our visits in ST5 are booked in the same way as anywhere else. If you’re just outside Maer, we cover Baldwin's Gate (1 mile north), Madeley Park (2 miles north), Ashley (2 miles south-west), Ashley Dale (3 miles south-west) and Aston (3 miles north-west). Further out, we also cover Stafford (12 miles south-east), Newcastle-under-Lyme (6 miles north-east), Longton (8 miles north-east), Stone (7 miles south-east), Biddulph (13 miles north-east) and Alsager (11 miles north).

Around Maer

Locally, our jobs take us to homes close to Baldwins Gate CofE(VC) Primary School and Church of St Peter, among other places. Nearby you will also find Castle Hill (1.9 miles west) and Harplands Hospital (5.7 miles north-east).

Map of Maer © OpenStreetMap contributors

Worktop repair in Maer without replacing anything

Pan burns, chipped edges and knife scratches make up most of our worktop work. All are repaired in place. Typical jobs include chips in quartz or granite and gouges in the surface, across quartz, granite & marble and solid wood.

All our work comes with a one-year guarantee, wherever you are in Staffordshire.

Location
Maer (ST5)
Area hub
Staffordshire
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Wooden worktop being repaired in a customer’s kitchen

Repair or replace in Maer?

Stone and quartz have to be templated and cut, so replacing one section is a big job. A repair takes a few hours. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why us?

  • Colour-matched on site
  • Every repair guaranteed for a year
  • Dust sheets down, tidy finish
  • We’ll tell you if it’s not worth repairing

See our prices page.

Keeping it looking good

Looking after the surface is easy:

  • Don’t let water sit on joints
  • Clean spills straight away
  • Watch the edges with heavy pans
  • Re-oil timber worktops

Hot pans should always go on a trivet. Heat can mark quartz and stone as well.

Damage near the sink is worth repairing quickly, because water gets in and swells the board.

Maer: your questions answered

Can you match the pattern on my worktop?

We match colour, flecks and veining by hand, so the repair blends into the surface.

What happens once I’ve sent pictures?

We come back with a fixed price, plus dates. You’re under no obligation.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Which areas do you work in?

All of Staffordshire, and the rest of the UK. There’s no extra charge for travel.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

The process

Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a few hours, depending on the damage. We leave the room clean and ready to use once it has cured.

  1. The area around the damage is protected.
  2. The damage is cleaned and any loose material removed.
  3. It’s filled and levelled with the surface.
  4. We recreate the colour and pattern by hand.
  5. The repair is sealed and polished to match.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access

Getting a price

Send us a picture of the damage and one of the entire item, and tell us you’re in Maer, and we will reply with a fixed quote.

Get a free quote

Related advice

Can I fix it myself?

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

What we’re called out for in Maer

Edges and corners chip most frequently, usually from pans, tins or dishes knocked against them.

Most people contact us after spotting one of these:

  • Burns from hot pans
  • Damage to a stone worktop
  • Knife marks
  • Dents and gouges

Before you book anyone

  • How long it needs to cure
  • Who turns up on the day
  • What prep work is covered
  • Whether the price covers travel

10 questions to ask before you book

Repairs by material

Solid surface

Solid surface tops are the same material all the way through, so scratches and burns can frequently be sanded out and refinished.

Quartz

Quartz is tough, though edges can chip. Chips are filled with tinted resin and polished.

What worktop repair costs

Repairs from £95. Each job gets its own fixed price. This is what makes a difference:

  • Any earlier repairs that need removing first
  • How many areas need work
  • How easy the damage is to reach
  • The material

Our prices are the same across the UK, with no extra for Maer. What changes the price is the job itself: the material, the amount of damage and how many items.

Getting a price from pictures

Two or three clear pictures are usually enough. It helps if you send:

  • One sharp close-up of the damage
  • Details of any past repairs
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size

If you are in Maer and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

When a repair is not the answer

Before booking, it’s worth knowing the limits too:

  • Laminate that has blown or swollen
  • Discolouration deep in quartz
  • Cracks right through stone that has moved

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Granite & marble
  • Solid surface (such as Corian)
  • Laminate
  • Quartz
  • Solid wood
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.