Staffordshire · England
Bath re-enamelling & resurfacing in Maer, Staffordshire
Local bath re-enamelling for Maer: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A coloured bath you want in white
Bath re-enamelling in Maer, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you’re dealing with a roll-top that’s seen better days and several chips and rust patches, we can help.
Big or small, you get the same one-year guarantee in Maer and across Staffordshire.
- Where
- Maer (ST5)
- Region
- Staffordshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Maer
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Towns and villages near Maer
What else we do in Maer
When we would advise against a repair
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- Holes rusted through the metal
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Send us photos and we will tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Maer: your questions answered
Do you work in Maer?
Yes. We work across the UK and travel to Maer. Send us photos for a fixed quote, or call 0345 017 0787.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
What happens once I’ve sent photos?
You will get a fixed quote back, plus dates. You are under no obligation.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Keep toiletries on a shelf rather than in the bath
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
- Don’t leave a chip unrepaired
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Do you need bath re-enamelling in Maer?
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is usually as strong as ever.
Look out for any of the following:
- Thin, worn enamel in places
- Chips and rust in more than one place
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
What to look for in a quote
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
- Whether there are any call-out or travel charges
- What protection goes down before work starts
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Where we work around Maer
Maer is about 6 miles south-west of Newcastle-under-Lyme, in Staffordshire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Maer is one of 512 towns and villages in Staffordshire we cover. We work right across the region, from Maer to Birmingham (about 37 miles away).
Jobs in ST5 are booked in the same way as anywhere else. If you’re just outside Maer, we cover Baldwin's Gate (1 mile north), Madeley Park (2 miles north), Ashley (2 miles south-west), Ashley Dale (3 miles south-west) and Aston (3 miles north-west). We also work in nearby towns such as Stafford (12 miles south-east), Newcastle-under-Lyme (6 miles north-east), Longton (8 miles north-east), Stone (7 miles south-east), Biddulph (13 miles north-east) and Alsager (11 miles north).
What’s near Maer
Typical jobs here are in homes near Baldwins Gate CofE(VC) Primary School and Church of St Peter and the streets around them. Further afield, we also cover the area around Castle Hill (1.9 miles west) and Harplands Hospital (5.7 miles north-east).
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Maer. The price depends on:
- How easy the damage is to reach
- How much damage there is
- How many items we do on one visit
- What the surface is made of
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Quotes from your pictures
Two or three clear photos are typically enough. It helps if you send:
- The material, if you know it
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the following day.
Before we arrive
- Have a window or extractor fan available
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
