Telford and Wrekin · England
Worktop repair in Malinslee, Telford and Wrekin
Chip, burn and scratch repairs to kitchen and bathroom worktops in Malinslee, carried out at your home and guaranteed for a year.
- Repairs from £95
- A damaged sink edge
- Chips caused during installation
Worktop repair in Malinslee, done in place
Matching a pattern is the skilled part of a worktop repair. We build up the colour and flecks by hand. Common call-outs are for chipped corners and chips caused during installation, across granite & marble, solid wood and solid surface (such as Corian).
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Malinslee (TF4, TF3, TF7)
- Region
- Telford and Wrekin
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Once the work has cured, treat it gently:
- Never put hot pans down directly
- Do not knock pans against the edge
- Do not let water sit on joints
- Re-oil timber worktops
Let the repair cure for the time we give you before putting anything heavy or hot on it. After that, trivets and chopping boards protect it best.
Do not leave damage by the sink, as water can get in and cause swelling.
Repair or replace: which is better?
Replacing even one length of worktop means templating, cutting, fitting and often a new sink and hob connection. A repair takes a few hours and leaves everything in place. Our worktop repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
What you get with us
- Everything repaired in place
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
Read our pricing.
Common problems we fix in Malinslee
Water around the sink can get into laminate and wood joints, which can cause swelling.
Send us a picture if you notice any of these:
- Burns from hot pans
- Dents and gouges
- Chips in quartz or granite
- Chips caused during installation
Before you book anyone
- How your room will be protected
- How to look after the finish
- Whether a trained technician does the job
- How long the guarantee is and what it covers
Malinslee questions
Can you repair something that’s been repaired before?
Typically, yes. We remove the old repair before doing a new one.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Do you repair quartz?
Yes. We match the colour and polish the repair.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you price it without visiting?
Normally, yes. Clear photos let us give you a fixed price without visiting.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
How do I get a price for worktop repair in Malinslee?
Prices start from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
What affects the price in Malinslee
Repairs from £95. You won’t pay by the hour. The price depends on:
- Access to the area
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send pictures for a quote
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- What it’s made of, if you know
- A clear, close picture of the problem area
- A wider photo showing the entire worktop
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Landlord and trade work in Malinslee
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Different materials, different repairs
Laminate
Laminate is a printed surface bonded to a board. Damage is filled and the pattern painted in by hand.
Solid surface
Solid surface tops are the same material all the way through, so marks can often be sanded and refinished.
Malinslee and the surrounding area
Malinslee is about 1 mile south of Telford, in Telford and Wrekin. Customers in Malinslee get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Malinslee is one of 79 places in Telford and Wrekin where we work. Our nearest city page is Birmingham, about 28 miles away.
We work across TF4, TF3 and TF7. Whether you live on Moor Road, Park Road and Bank Road or a nearby road, a technician can come to you. Other places close to Malinslee include Dawley (1 mile south-west), The Rock (1 mile north-west), Old Park (1 mile north), Newdale (1 mile north-west) and Randlay (1 mile south-east). Larger places within reach include Wellington (3 miles north-west), Newport (7 miles north-east), Leegomery (3 miles north-west), Dothill (4 miles north-west), Donnington Wood (3 miles north) and Trench (3 miles north).
Near you in Malinslee
Locally, our jobs take us to homes close to Church of St Leonard, Telford Town Park and Ring "O" Bells pub. You’ll also find Old Park Primary School (under half a mile east) and The Telford Langley School (0.7 miles south-west). The nearest railway station is Telford Central station, about 0.9 miles north-east of the centre. Further afield, we also cover the area around Museum of The Post Office In The Community (3 miles south) and Telford Shopping Centre (0.6 miles north-east). Green spaces nearby include The Ercall.
Also in Malinslee
The process
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It typically takes a morning or an afternoon, and you can get on with other things while we’re there.
- The area around the damage is protected.
- We clean the damage and remove anything loose.
- We fill it and level it with the worktop.
- The colour and pattern are built up by hand.
- We seal and polish it to the right sheen.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
Get a quote
To get a price, send two or three photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Related advice
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
