Telford and Wrekin · England
Bath Re-enamelling for Malinslee homes
Fixed-price bath re-enamelling in Malinslee and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that won’t shift
Bath re-enamelling in Malinslee, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We work on pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough.
Homes around Malinslee range from cottages to newer houses. Some still have cast iron or steel baths, which are worth keeping, and newer ones normally have acrylic.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Malinslee (TF4, TF3, TF7)
- Region
- Telford and Wrekin
- Cover
- A year, on every repair
- Quote
- From £350. Fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Malinslee
We carry out planned and one-off repairs for housing associations and facilities teams in Telford and Wrekin and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Bath re-enamelling around Malinslee
If you live in one of the older homes near a church such as Church of St Leonard, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing. Rented homes near Telford Central station (about 0.9 miles north-east) change hands frequently, and repairing baths between tenants is quicker than replacing them.
Malinslee is about 1 mile south of Telford, in Telford and Wrekin. Our repair technicians come to clients in Malinslee and nearby villages, so there’s no workshop to go to. We work in 79 places across Telford and Wrekin. Our jobs stretch from Malinslee to Birmingham (about 28 miles away).
All of TF4, TF3 and TF7 is within our area for bath re-enamelling, from the main roads to the quietest streets. Whether your bath is in a home on Moor Road, Park Road and Bank Road or a nearby road, we can come to you. Other places close to Malinslee include Dawley (1 mile south-west), The Rock (1 mile north-west), Old Park (1 mile north), Newdale (1 mile north-west) and Randlay (1 mile south-east). Within a short drive, we also cover Wellington (3 miles north-west), Newport (7 miles north-east), Leegomery (3 miles north-west), Dothill (4 miles north-west), Donnington Wood (3 miles north) and Trench (3 miles north).
Local landmarks in Malinslee
Locally, our jobs take us to homes close to Telford Town Park, Ring "O" Bells pub and The Telford Langley School and the streets around them. The nearest railway station is Telford Central station, about 0.9 miles north-east. Further afield, we also cover the area around Museum of The Post Office In The Community (3 miles south) and Telford Shopping Centre (0.6 miles north-east). Not far away are The Ercall.
Repair or replace in Malinslee?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. For a home around Malinslee where the bath is sound, replacing it is rarely worth the cost and disruption.
Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- One price list for the whole UK
- Rooms protected and left tidy
- One-year guarantee on every repair
- Straight answers about what a repair can do
See our Pricing And Guide to resurfacing and replacement costs.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- Don’t leave a chip unrepaired
- Store bottles off the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually. What matters most is:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The material
- How hard the colour is to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- One picture of the whole bath
- The material, if you know it
Upload a photo of the damage and one of the whole item, and tell us you’re in Malinslee, and we will reply with a fixed quote.
When a repair isn’t the answer
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
Send us photos and we will tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Common questions in Malinslee
Is it worth repairing old baths in a period home in Malinslee?
Typically, yes. Older baths are often worth repairing rather than replacing. Send us pictures and we’ll tell you what’s possible.
Can you fix baths in a rental near Telford Central station?
Of course: photos and an address are all we need for a price.
Which areas do you work in?
Everywhere in the UK, Malinslee included. There is no extra charge for travel.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead. In a smaller place like Malinslee, parking is rarely a problem. If you’re down a lane or a long drive, tell us when you book.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Read more
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Also in Malinslee
About our accreditations · Every repair comes with a one-year guarantee.
