Pembrokeshire · Wales
Worktop Repair for Middle Mill homes
Worktop repair in and around Middle Mill: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A chipped edge
- Chips caused during installation
Covering Middle Mill
Middle Mill (Welsh: Felinganol) is about 11 miles north-west of Haverfordwest, in Pembrokeshire. Anywhere in SA62, a technician comes to you. Middle Mill is one of 223 places in Pembrokeshire where we work.
All of SA62 is within our area. If you’re just outside Middle Mill, we cover Lower Solva (1 mile south), Solva (1 mile south), Solfach (1 mile south), St Elvis (1 mile south) and Brawdy (3 miles east). We also work in nearby towns such as Haverfordwest (11 miles south-east), Milford Haven (14 miles south-east), The Marsh (11 miles south-east), Fishguard (12 miles north-east), Goodwick (12 miles north-east) and Pill (14 miles south-east).
Landmarks near Middle Mill
Our customers here include homes close to The Cambrian Inn and Church of St.David and the streets around them. Further afield, we also cover the area around Y Castell (within half a mile south-west) and Whitewell (3.4 miles west). Green spaces nearby include Gewni.
About our worktop repair in Middle Mill
Pan burns, chipped edges and knife scratches make up most of our worktop work. We repair them all in your kitchen. Our repair technicians work on solid surface (such as Corian), quartz and granite & marble, and people most often call us about dents and gouges and damage to a stone worktop.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Middle Mill (SA62)
- County
- Pembrokeshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Laminate
Laminate is a printed surface over a board. Chips and burns are filled and the pattern recreated.
Granite and stone
Granite and stone chip at edges and cut-outs. We fill and polish the repair to match the stone.
Landlord and trade work in Middle Mill
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- Water-swollen laminate
- A cracked stone top that is unsupported
- Deep heat discolouration in quartz, which may not fully disappear
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Quartz
- Laminate
- Solid surface (such as Corian)
- Granite & marble
- Solid wood
Questions from Middle Mill
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Will the repair match a patterned worktop?
We match colour, flecks and veining by hand, so the repair blends into the surface.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can you repair a burn in a worktop?
Typically. A picture lets us check.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your photos and we will quote them together.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to empty the worktop?
Just clear the area around the damage. We protect the rest of the kitchen.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Nearby places to Middle Mill
Other services in Middle Mill
Repair or replace in Middle Mill?
A new worktop means removing the old one, cutting and fitting a new one and refitting the sink and hob, and matching the rest of the kitchen can be hard. Repairing the damage leaves the worktop in place. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Middle Mill
- No extra charge for your area
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page.
Do you need worktop repair in Middle Mill?
The worst damage frequently happens in a moment: a hot pan put down without a trivet, or a heavy pan knocked against the edge. Scratches build up more slowly, from knives and grit.
These are the problems we are asked about most:
- Snagging damage in a new kitchen
- Knife marks
- A chipped quartz edge
- A damaged sink edge
What your quote should include
- How long the guarantee is and what it covers
- How long it needs to cure
- Aftercare advice
- Who will actually do the work
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a few hours, depending on the damage, including clearing up.
- First we look at the damage and what the worktop is made of.
- We clean the area and prepare the edges of the damage.
- We fill with a filler suited to the material and rebuild any missing edge.
- We recreate the colour and pattern by hand.
- Finally we seal or finish the area to match.
How to prepare
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Getting a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
What worktop repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- The material
- How hard the colour is to match
- Whether we combine several jobs
- What kind of damage it is
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- One picture of the whole worktop
- Natural light rather than flash
- Something in shot to show the size
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire worktop, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
