Pembrokeshire · Wales

Worktop repair in Solva, Pembrokeshire

Chip, burn and scratch repairs to kitchen and bathroom worktops for homes and businesses in Solva and across Pembrokeshire. Free, fixed quotes from your photos.

  • Repairs from £95
  • Dents and gouges
  • A chipped edge
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair for Solva homes

Solva and nearby

Solva is about 11 miles north-west of Haverfordwest, in Pembrokeshire. Wherever you are in the SA62 postcode area, we carry out the work at your property. Solva is one of 223 towns and villages in Pembrokeshire where we work.

Jobs in SA62 are booked in the same way as anywhere else. You will find streets such as Fort Road, High Street and Panteg Road, all of which we cover. Nearby, we also work in Lower Solva (1 mile north-east), Solfach (1 mile west), St Elvis (1 mile south-east), Middle Mill (1 mile north) and Brawdy (3 miles east). Larger places within reach include Haverfordwest (11 miles south-east), Milford Haven (13 miles south-east), The Marsh (11 miles south-east), Fishguard (12 miles north-east), Goodwick (12 miles north-east) and Pill (13 miles south-east).

Near you in Solva

Around Solva, we work in homes near The Harbour Inn and Church of St Aidan. A little further out are Whitewell (3.4 miles west) and Y Castell (0.7 miles north). Not far away are Gewni.

Map of Solva © OpenStreetMap contributors

Worktop repair in Solva, done in place

We repair worktops in place. Most repairs take a few hours, and you can use the worktop again shortly afterwards. Typical jobs include scorch marks from pans and chips caused during installation, across granite & marble, solid surface (such as Corian) and quartz.

A one-year guarantee comes as standard, so you are not left on your own once we have gone.

Surface Doctor technician repairing a wooden kitchen worktop
Area
Solva (SA62)
Region
Pembrokeshire
Cover
A year, on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Solva: your questions answered

Can you repair something that’s been repaired before?

In most cases. The old repair comes out first, so let us know about it.

Will the price change on the day?

The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.

Will the repair match a patterned worktop?

We match colour, flecks and veining by hand, so the repair blends into the surface.

Do you repair quartz?

Yes, frequently. The repair is colour-matched and polished to the quartz’s finish.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

What does worktop repair cost?

Prices start from £95. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.

Do I need to clear the kitchen?

Only the area we are working on. The rest is covered and protected.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

Different materials, different repairs

Quartz

Quartz worktops are mostly stone set in resin. We fill and polish chipped edges to match the sheen.

Laminate

Laminate is a printed surface bonded to a board. Damage is filled and the pattern painted in by hand.

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

What affects the price in Solva

Repairs from £95. A fixed quote means you know the cost before you book. We take into account:

  • How many items we do on one visit
  • Where the damage is and how we get to it
  • What kind of damage it is
  • The material

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.

Send photos for a quote

When you take your photos, these tips help us give you a firm price:

  • One picture of the entire worktop
  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates

A quote takes minutes to ask for: photograph the damage, then the whole worktop, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

Do you need worktop repair in Solva?

The worst damage frequently happens in a moment: a hot pan put down without a trivet, or a heavy pan knocked against the edge. Scratches build up gradually from knives and grit.

People normally call us after spotting one of these:

  • Scratches and knife marks
  • Chips caused during installation
  • Scorch marks from pans
  • Damage around the sink cut-out

What to look for in a quote

  • What protection goes down before work starts
  • The length of the guarantee and what it covers
  • What aftercare is recommended
  • Is the price fixed, and does it include VAT?

Our hiring checklist

What we cannot put right

Not everything can be repaired, and we’d rather say so up front. We can’t fix:

  • Laminate swollen by water from underneath
  • A cracked stone top that’s unsupported
  • Severe heat marks in quartz

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Solid wood
  • Granite & marble
  • Quartz
  • Solid surface (such as Corian)
  • Laminate

What happens on the day

Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. We look at the damage and the worktop’s finish.
  2. We cut back any burnt or loose material.
  3. We fill and shape the damaged area.
  4. We recreate the pattern, flecks or grain.
  5. It’s finished to the same sheen and left to cure.

Getting ready for the visit

  • Ensure the area is dry
  • Plan for the room to be out of bounds to pets and children
  • Make sure the room can be ventilated

How to get a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Send photos for a quote

Advice

Repair or replace in Solva?

Replacing even one length of worktop means templating, cutting, fitting and frequently a new sink and hob connection. A repair takes a few hours and leaves everything in place. Prices start from £95. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.

Why book with us

  • Free fixed quotes from pictures
  • Dust sheets down, tidy finish
  • Colour-matched on site
  • A year’s guarantee on all work

See our prices page.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.