Pembrokeshire · Wales
Worktop Repair in Lower Solva
Chip, burn and scratch repairs to kitchen and bathroom worktops for homes and businesses in Lower Solva and across Pembrokeshire. Free, fixed quotes from your pictures.
- Repairs from £95
- Chips caused during installation
- Chips in quartz or granite
What worktop repair costs
Prices start from £95. There’s no charge for travel to Lower Solva. The price comes down to:
- The type of damage
- Where the damage is and how we get to it
- How hard the colour is to match
- How many areas need work
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- A clear, close picture of the problem area
- One picture of the whole worktop
- Your postcode, so we can check dates
- Natural light rather than flash
Getting a quote takes a couple of minutes: photograph the damage, then the whole worktop, add your postcode and send them over. What comes back is a fixed price, not a guess.
Worktop repair in Lower Solva without replacing anything
The hard part of a worktop repair is matching the pattern. We build up the colour and flecks by hand so the repair blends in. We work on quartz, solid surface (such as Corian) and granite & marble, and common reasons people get in touch are a dent from a dropped pan and damage from fitting or building work.
Every job is backed for twelve months in Lower Solva and everywhere else. If something goes wrong with the work, we come back.
- Location
- Lower Solva (SA62)
- County
- Pembrokeshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Lower Solva and the surrounding area
Lower Solva is about 11 miles north-west of Haverfordwest, in Pembrokeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Lower Solva is one of 223 places in Pembrokeshire we cover.
We work across the SA62 postcode area. Whether you live on Fort Road, High Street and Panteg Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Solva (1 mile south-west), St Elvis (1 mile south-east), Solfach (1 mile west), Middle Mill (1 mile north) and Brawdy (2 miles east). Within a short drive, we also cover Haverfordwest (11 miles south-east), Milford Haven (13 miles south-east), The Marsh (11 miles south-east), Fishguard (12 miles north-east), Goodwick (12 miles north-east) and Pill (13 miles south-east).
Near you in Lower Solva
We visit homes around The Cambrian Inn and Church of St Teilo. A little further out are Whitewell (3.5 miles west) and Y Castell (0.6 miles north). For a walk, there’s Gewni.
FAQs for Lower Solva
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Can you match granite flecks?
Yes. We recreate the pattern by hand so it blends in.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
Do I need to empty the worktop?
Just near the damage. The rest of the kitchen stays usable.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Do you cover the entire of Pembrokeshire?
The whole UK, including all of Pembrokeshire. Send your postcode with your photos and we will confirm dates.
Do you need worktop repair in Lower Solva?
Sink and hob cut-outs are weak points, and that’s where cracks often begin.
These are the problems we are asked about most:
- Scratches and knife marks
- Chips in quartz or granite
- A chipped edge
- Chips near the sink
Questions to ask before booking
- What the guarantee covers, and for how long
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- What prep work is covered
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Nearby places to Lower Solva
What else we do in Lower Solva
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a few hours. At the end we talk you through the curing time and the aftercare.
- First, we check the damage and the finish we need to match.
- We cut back any burnt or loose material.
- We fill and shape the damaged area.
- We recreate the pattern, flecks or grain.
- It’s finished to the same sheen and left to cure.
How to prepare
- Let the surface dry out before the visit
- Ensure the room can be ventilated
- Clear the area around the damage
Get a quote
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Never put hot pans down directly
- Do not cut directly on the worktop
- Don’t leave spills to soak in
- Use pH-neutral cleaners on stone
Hot pans should always go on a trivet. Even stone and quartz can be marked by heat.
A chip on an edge can grow, and on laminate, water can get into the core. An early repair prevents it.
What we can’t put right
A few problems are outside what a surface repair can do:
- Cracks right through stone that has moved
- Water-swollen laminate
- Discolouration deep in quartz
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Solid wood
- Quartz
- Laminate
- Granite & marble
- Solid surface (such as Corian)
Different materials, different repairs
Laminate
Laminate worktops have a printed decorative layer over a board core. Chips and burns are filled and the pattern recreated.
Quartz
Quartz is crushed stone bound with resin. We fill and polish chipped edges.
Why repair rather than replace?
Stone and quartz have to be templated and cut, so replacing a section takes time and money. Repairing it is a few hours’ work. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
Why us?
- No need to remove anything
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Most jobs done in one visit
See our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
