Herefordshire · England
Worktop Repair for Norton Wood homes
Chip, burn and scratch repairs to kitchen and bathroom worktops in Norton Wood, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips in quartz or granite
- Chipped corners
Worktop repair at your home in Norton Wood
Pan burns, chipped edges and knife scratches are the most common worktop repairs. We repair them all in your kitchen. Whether it’s dents and gouges and chips on edges and corners, we can generally put it right, on solid wood, quartz and granite & marble alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Norton Wood (HR4)
- Region
- Herefordshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Keep a trivet by the hob
- Keep wood oiled
- Do not cut directly on the worktop
- Steer clear of strong cleaners
Use chopping boards and trivets, wipe up spills promptly, and re-oil wooden worktops regularly.
Don’t leave damage by the sink, as water can get in and cause swelling.
Also near Norton Wood
More services for Norton Wood
Why repair rather than replace?
If the worktop is swollen by water or badly damaged along its length, replacement may be the answer. For chips, burns and scratches, repair is normally far better value. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Norton Wood
- Every repair guaranteed for a year
- Colour-matched on site
- Honest advice, even when it means no job
- Rooms protected and left tidy
Take a look at our prices page.
What affects the price in Norton Wood
Prices start from £95. There is no area surcharge for Norton Wood. What changes the price is:
- The size and number of damaged areas
- Unusual colours or finishes
- What the surface is made of
- How easy the damage is to reach
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Two or three clear pictures are generally enough. It helps if you send:
- A close-up of the damage, in focus
- The material, if you know it
- A wider photo showing the whole worktop
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: photograph the damage, then the whole worktop, add your postcode and send them over. You will get a fixed price, not an estimate.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Common problems we fix in Norton Wood
The worst damage frequently happens in a moment: a hot pan set straight down, or a heavy pan catching the edge. Scratches build up more slowly, from knives and grit.
If you can see any of these, send us a picture:
- A chipped edge
- A heat mark or burn
- Dents and gouges
- Cuts and scratches in the surface
What your quote should include
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
- What protection goes down before work starts
What we do, step by step
Arrival times are agreed in advance. On site, it takes a few hours for most jobs. We leave the room clean and ready to use once it has cured.
- We look at the damage and the worktop’s finish.
- We cut back any burnt or loose material.
- We fill and shape the damaged area.
- The pattern, flecks or grain are recreated.
- We finish it to match the sheen and leave it to cure.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
How to get a price
Upload pictures of the damage and a wider shot of the entire item, and tell us you’re in Norton Wood, and we will come back with a fixed quote.
Advice
Honest limits
We’ll always be straight with you, so here’s what a repair can’t fix:
- Cracks right through stone that has moved
- Severe heat marks in quartz
- Failed support under the worktop
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Laminate
- Granite & marble
- Quartz
- Solid wood
- Solid surface (such as Corian)
About Norton Wood
Norton Wood is about 10 miles north-west of Hereford, in Herefordshire. From the centre of Norton Wood to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 255 places across Herefordshire, from the larger towns to small villages. We work right across the region, from Norton Wood to Birmingham (about 50 miles away).
Postcode districts we cover here: HR4. If you are just outside Norton Wood, we cover Calver Hill (1 mile east), Norton Canon (1 mile east), Sallys (1 mile north-west), Staunton on Wye (2 miles south) and Logaston (2 miles north-west). Larger places within reach include Hereford (10 miles south-east), Leominster (10 miles north-east), Redhill (11 miles south-east), Newton Farm (10 miles south-east), Whitecross (10 miles south-east) and Eign Hill (11 miles south-east).
Around Norton Wood
In Norton Wood, that means homes near Church of St Nicholas and the streets around them. Well-known places in the area include Kinnersley Castle (1.4 miles north-west) and Weobley Museum (3.1 miles north-east). The countryside around Norton Wood includes Garnons Hill.
Questions from Norton Wood
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
What your worktop is made of matters
Solid surface
Solid surface materials are uniform throughout, so scratches and burns can frequently be sanded out and refinished.
Laminate
A laminate worktop is a thin decorative layer on a board. We fill damage and paint in the pattern by hand.
About our accreditations · Every repair comes with a one-year guarantee.
