Cornwall · England
Worktop repair in Radnor, Cornwall
Worktop repair across Radnor and nearby, generally in one visit.
- Repairs from £95
- Chips on edges and corners
- Dents and gouges
Worktop repair at your home in Radnor
You don’t need a new worktop because of one mark. The damage is filled and refinished so it blends into the pattern. If you’re dealing with chipped corners and a dent from a dropped pan, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee in Radnor and across Cornwall.
- Where
- Radnor (TR16, TR15)
- Region
- Cornwall
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Solid surface
Solid surface materials are uniform throughout, so scratches and burns can often be sanded out and refinished.
Wood
Timber tops can be sanded and refinished, and burns and dents repaired.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Deep heat discolouration in quartz, which may not fully disappear
- A top that moves on its units
- Through cracks in stone that is moving
Send us photos and we will tell you honestly.
Materials we work on in Radnor
- Laminate
- Quartz
- Solid wood
- Solid surface (such as Corian)
- Granite & marble
Radnor questions
Do you cover the whole of Cornwall?
We work UK-wide. Our prices are the same everywhere.
Can you match granite flecks?
Yes. We recreate the pattern by hand.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
What else we do in Radnor
Landlord and trade work in Radnor
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What affects the price in Radnor
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- The material and finish
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
If you’re in Radnor and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
What we’re called out for in Radnor
Sink and hob cut-outs are weak points, and that’s where cracks frequently begin.
People normally call us when they notice one of these:
- Burns from hot pans
- Dents and gouges
- Cuts and scratches in the surface
- Damage from fitting or building work
Comparing quotes
- Whether there are any call-out or travel charges
- How your room will be protected
- What happens if they find more damage
- Whether a trained technician does the job
How it works
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We look at the damage and the worktop’s finish.
- We cut back any burnt or loose material.
- The area is filled and shaped.
- We recreate the pattern, flecks or grain.
- It’s finished to the same sheen and left to cure.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire worktop, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
Covering Radnor
Radnor is about 1 mile north-east of Redruth, in Cornwall. Across the TR16 area, a technician comes to you. Radnor is one of 644 towns and villages in Cornwall we cover.
Postcode districts we cover here: TR16 and TR15. If you’re just outside Radnor, we cover Mount Ambrose (1 mile south), Treleigh (1 mile south-west), Treskerby (1 mile south-east), Wheal Rose (1 mile north-east) and North Country (1 mile west). Further out, we also cover Truro (7 miles east), Newquay (13 miles north-east), Falmouth (9 miles south-east), Camborne (4 miles south-west), Helston (11 miles south) and Hayle (10 miles south-west).
What’s near Radnor
We visit homes around Treleigh Community Primary School, The Mount Ambrose Inn and Church of St Stephen. The closest station to Radnor is Redruth station, about 1.4 miles south. Nearby you’ll also find Carn Brea Castle (2.5 miles south-west) and Camborne Redruth Community Hospital (2.1 miles south-west). The countryside around Radnor includes St Agnes Beacon.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Keeping it looking good
Nothing complicated is needed:
- Don’t cut directly on the worktop
- Don’t knock pans against the edge
- Use pH-neutral cleaners on stone
- Wipe up spills quickly
Always use a trivet and chopping board, wipe spills immediately, and re-oil wooden worktops regularly.
Edge chips can get bigger, and on laminate, water can get into the core. Repairing it early stops that.
About our accreditations · Every repair comes with a one-year guarantee.
