Kent · England
Bath Re-enamelling in Abbey Gate
Bath re-enamelling for Abbey Gate, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
Bath re-enamelling at your home in Abbey Gate
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you’re dealing with an outdated colour you’d like to change and wear marks under the taps, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Abbey Gate (ME14, ME16)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Some jobs are not right for a repair, including:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think.
Materials we work on in Abbey Gate
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Towns and villages near Abbey Gate
Also in Abbey Gate
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Abbey Gate. The price depends on:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Access to the area
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- The material, if you know it
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Abbey Gate and the surrounding area
Abbey Gate is about 1 mile north-west of Foley Park, in Kent. We visit customers in Abbey Gate, so you don’t need to take anything anywhere. Abbey Gate is one of 922 places in Kent we cover. You can also see our page for London, about 30 miles away.
Jobs in ME14 and ME16 work the same way as everywhere else we cover. Whether you live on Lock Lane, Grange Lane and Tyland Lane or anywhere nearby, we can come to you. Main roads around Abbey Gate include the M20, so getting to you is simple. Other places close to Abbey Gate include Sandling (1 mile north), Ringlestone (1 mile south), Harbourland (1 mile east), Penenden Heath (1 mile south-east) and Foley Park (1 mile south-east). We also work in nearby towns such as Sittingbourne (10 miles east), Sevenoaks (14 miles west), Gravesend (11 miles north-west), Tonbridge (12 miles south-west), Northfleet (12 miles north-west) and Minster (15 miles north-east).
Landmarks near Abbey Gate
Typical jobs here are in homes near The Yew Tree pub, Sandling Primary School and The Maplesden Noakes School and the streets around them. Nearby too are St Paul's Church (1.1 miles south-east) and Tyland Barn (0.5 miles north). Abbey Gate’s nearest station is Maidstone East station, about 1.4 miles south of the centre. Well-known places in the area include Allington Castle (under half a mile south-west) and Fremlin Walk (1.6 miles south). Green spaces nearby include Boxley Hills and Burham Down.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Point us to the nearest place to park
How to get a price
If you’re in Abbey Gate and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
FAQs for Abbey Gate
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Can I get a quote without a visit?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
How much does bath re-enamelling cost in Abbey Gate?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item with your ME14 postcode.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work in Abbey Gate?
Yes. We work across the UK and travel to Abbey Gate. Send us photos for a fixed quote, or call 0345 017 0787.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Repair or replace in Abbey Gate?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Abbey Gate. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Abbey Gate
- Nothing taken out or refitted
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
See our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
