Kent · England
Bath Re-enamelling for Grove Green homes
Our repair technicians come to Grove Green for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- Enamel that’s lost its shine and feels rough
Grove Green and the surrounding area
Grove Green is about 1 mile east of Foley Park, in Kent. Jobs in Grove Green are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Our repair technicians cover all 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for London, about 32 miles away.
All of ME14 is covered, from the main roads to the quietest streets. You’ll find streets such as New Cut Road, Hampton Road and Bargrove Road, all of which we cover. Neighbouring places we cover include Penenden Heath (1 mile west), Weavering (1 mile south-east), Foley Park (1 mile west), Harbourland (1 mile north-west) and Detling (1 mile north-east). Larger places within reach include Sittingbourne (9 miles north-east), Gravesend (13 miles north-west), Tonbridge (13 miles south-west), Faversham (15 miles east), Northfleet (14 miles north-west) and Minster (14 miles north-east).
Local landmarks in Grove Green
Typical jobs here are in homes near Valley Park School, Bell Inn and Maidstone and the streets around them. You’ll also find Vinters Valley Park (under half a mile south-west) and Church of St Luke (0.9 miles west). The nearest railway station is Bearsted station, about 1.3 miles south-east of the centre. Other landmarks nearby include KIMS hospital (within half a mile north-east) and Queen's Own Royal West Kent Regiment Museum (1.4 miles west). The countryside around Grove Green includes Burham Down and Detling Hill.
How we handle bath re-enamelling in Grove Green
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our technicians work on acrylic baths, cast iron baths and basins & shower trays, and the jobs we see most are several chips and rust patches and a dull, rough surface that won’t come clean.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Grove Green (ME14)
- Region
- Kent
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Your questions about bath re-enamelling in Grove Green
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Do you cover the entire of Kent?
Across the UK. Our prices are the same everywhere.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Places near Grove Green
What else we do in Grove Green
What affects the price in Grove Green
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The colour and finish to match
- Where the damage is and how we get to it
- The type of damage
- What the surface is made of
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Any details about the material
Email us photos of the damage and one of the entire item, with your ME14 postcode, and we’ll come back with a fixed quote.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
How to get a price
To get a price, send a couple of photos using our quote form or ring us. We’ll say right away whether it can be repaired.
Read more
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Work for landlords and builders
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Store bottles off the bath
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Everything repaired in place
- Most jobs done in one visit
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Take a look at our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
