Staffordshire · England
Bath Re-enamelling in Abbey Green
Damaged bath in Abbey Green? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
How we handle bath re-enamelling in Abbey Green
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Common call-outs are for a coating lifting around the plughole and staining under the taps and around the waste, on pressed steel baths, cast iron baths and acrylic baths.
Every repair comes with our one-year guarantee, wherever you are in Staffordshire.
- Area
- Abbey Green (ST13)
- Area hub
- Staffordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
It’s all simple stuff:
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Don’t leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
When to call us in Abbey Green
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
What to look for in a quote
- How long it needs to cure
- How your room will be protected
- How long the guarantee is and what it covers
- Who will actually do the work
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Your questions about bath re-enamelling in Abbey Green
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
What happens next?
We review the pictures and send a fixed quote with dates.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How it works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Advice
Places near Abbey Green
Other services in Abbey Green
Covering Abbey Green
Abbey Green is about 1 mile north of Leek, in Staffordshire. We travel to homes and businesses in Abbey Green, so you don’t need to take anything anywhere. We work in all 512 towns and villages across Staffordshire, from the larger towns to small villages. Our nearest city page is Manchester, about 26 miles away.
Here we cover the ST13 postcode area. We also cover the places around Abbey Green: Bridge End (1 mile south-west), Ball Haye Green (1 mile south-east), Poolend (1 mile west), Haregate (1 mile east) and Leek (1 mile south). Larger places within reach include Newcastle-under-Lyme (11 miles south-west), Longton (10 miles south-west), Biddulph (6 miles west), Alsager (12 miles west), Kidsgrove (9 miles west) and Cheadle (9 miles south).
Around Abbey Green
Our clients here include homes close to Leek High School, Dyers Arms and Westwood First School, among other places. Other landmarks nearby include St Edward's Hospital (2.6 miles south) and Brindley Mill And James Brindley Museum (0.5 miles south). Green spaces nearby include Coombes Valley RSPB reserve and Blakemere Pond.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why choose Surface Doctor in Abbey Green
- One visit for most repairs
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
See our prices page or resurfacing vs replacement cost guide.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
