Staffordshire · England
Bath re-enamelling & resurfacing in Bridge End, Staffordshire
Damaged bath in Bridge End? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A coloured bath you want in white
When to call us in Bridge End
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- A dull, rough surface that will not come clean
Before booking anyone
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- Whether cleaning and preparation are in the price
How we handle bath re-enamelling in Bridge End
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We work on basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are thin, worn enamel in places and brown or grey marks that don’t clean off.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Area
- Bridge End (ST13)
- Area hub
- Staffordshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
We agree an arrival time beforehand. On site, it takes the best part of a day for most jobs. The room is left tidy and you’ll know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Landlord and trade work in Bridge End
If you manage property in Bridge End, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Bridge End and the surrounding area
Bridge End is about 1 mile north-west of Leek, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Bridge End is one of 512 towns and villages in Staffordshire where we work. Our jobs stretch from Bridge End to Manchester (26 miles away).
We work across the ST13 postcode area and the streets around it. We regularly work on streets such as Kiln Lane, Highup Road and North Avenue. Close by, we cover Abbey Green (1 mile north-east), Westwood (1 mile south-west), Poolend (1 mile north-west), Leek (1 mile south-east) and Ball Haye Green (1 mile east). Larger places within reach include Newcastle-under-Lyme (10 miles south-west), Longton (9 miles south-west), Stone (15 miles south), Biddulph (5 miles west), Alsager (11 miles west) and Kidsgrove (8 miles west).
Landmarks near Bridge End
Typical jobs here are in homes near St John's Mission Room, Dyers Arms and Westwood College, among other places. Further afield, we also cover the area around St Edward's Hospital (2.2 miles south) and Brindley Mill And James Brindley Museum (under half a mile south-east). The countryside around Bridge End includes Gun and Blakemere Pond.
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Bridge End. The price depends on:
- Unusual colours or finishes
- The material and finish
- How much damage there is
- What kind of damage it is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- A photo taken from further back
- A coin beside the damage so we can judge size
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
- Do not leave a chip unrepaired
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Questions from Bridge End
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Do you work in Bridge End?
Yes. We work across the UK and come to Bridge End and the rest of Staffordshire. Send pictures and we’ll quote, or call 0345 017 0787.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
When a repair isn’t the answer
It helps to know what we can’t do:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Towns and villages near Bridge End
More services for Bridge End
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
