Cambridgeshire · England
Bath re-enamelling & resurfacing in Abbotsley, Cambridgeshire
Full bath re-enamelling and resurfacing at your home in Abbotsley, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath in a colour that no longer suits
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
How we handle bath re-enamelling in Abbotsley
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you’re dealing with enamel that’s lost its shine and feels rough and lots of chips and rust spots, we can usually put it right, on basins & shower trays, acrylic baths and pressed steel baths alike.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Abbotsley (PE19)
- Area hub
- Cambridgeshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The material
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Natural light rather than flash
- Any details about the material
- Something in shot to show the size
- A close-up of the damage, in focus
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll say immediately if a repair is the right fix.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Make sure the area is dry
- Let us know if it has been repaired before
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What else we do in Abbotsley
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
For landlords and businesses
For anyone letting property in or around Abbotsley, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Abbotsley questions
How long does re-enamelling take?
One day for most baths, ready the next day. We give you timings with the quote.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you work in Abbotsley?
We do. Technicians travel to Abbotsley from across the region, and the price is the same as everywhere else.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- We leave the room as we found it
- Straight answers about what a repair can do
Take a look at our full price list and resurfacing vs replacement cost guide.
Our work in Abbotsley
Abbotsley is about 3 miles south-east of St Neots, in Cambridgeshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We work in all 371 towns and villages in Cambridgeshire, from the larger towns to small villages. Our nearest city page is London, about 48 miles away.
We cover every part of PE19. Whether you live on High Street, Blacksmiths Lane and Blacksmiths Close or a nearby road, we can come to you. If you are just outside Abbotsley, we cover Tetworth (2 miles south), Woodbury (3 miles south), Gamlingay Great Heath (3 miles south), Everton (4 miles south-west) and Tempsford (4 miles south-west). We also work in nearby towns such as Cambridge (14 miles east), St Neots (3 miles north-west), Huntingdon (10 miles north), St Ives (11 miles north-east), Royston (13 miles south-east) and Cambourne (6 miles east).
Near you in Abbotsley
Locally, our jobs take us to homes close to St Margaret's Church and the streets around them. Abbotsley’s nearest station is St Neots station, about 3.2 miles north-west of the centre. Other landmarks nearby include Gannocks Castle (4.8 miles south-west). For a walk, there is Gamlingay Wood.
When to call us in Abbotsley
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
Keep an eye out for any of the following:
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Questions to ask before booking
- What aftercare is recommended
- What prep work is covered
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
