Derbyshire · England
Bath Re-enamelling in Acresford
Bath re-enamelling for Acresford, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
Do you need bath re-enamelling in Acresford?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
These are the problems we’re asked about most:
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
Questions to ask before booking
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- How the room is protected while they work
Bath re-enamelling in Acresford, done in place
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on pressed steel baths, basins & shower trays and cast iron baths, and people most often call us about a bath that stays dull however much you clean it and an original cast iron bath that needs restoring.
Every repair is covered by a one-year guarantee, wherever you are in Derbyshire.
- Area
- Acresford (DE12)
- Area hub
- Derbyshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Acresford?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Why us?
- Colour mixed on the day to match
- Fixed prices from your photos
- We will tell you if it’s not worth repairing
- One price list for the entire UK
Take a look at our pricing or resurfacing vs replacement cost guide.
Places near Acresford
Other services in Acresford
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. Allow most of the day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Questions from Acresford
Which areas do you work in?
Everywhere in the UK, Acresford included. Travel is included in the price.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do you work in Acresford?
Yes. We work across the UK and travel to Acresford and the rest of Derbyshire. Send pictures and we will quote, or call 0345 017 0787.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
About Acresford
Acresford is about 4 miles south-west of Ashby-de-la-Zouch, in Derbyshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in 532 places across Derbyshire. Our jobs stretch from Acresford to Birmingham (about 22 miles away).
Our repair technicians cover all of the DE12 postcode area. From Acresford Road and Measham Road or anywhere nearby, we can come to you. Other places close to Acresford include Stretton en le Field (1 mile south), Donisthorpe (1 mile north-east), Netherseal (1 mile west), Oakthorpe (1 mile east) and Short Heath (1 mile north). Further out, we also cover Swadlincote (4 miles north), Woodville (4 miles north), Upper Midway (5 miles north), Hilton (11 miles north), Midway (5 miles north) and Lower Midway (5 miles north).
Landmarks near Acresford
In Acresford, that means homes near Saltersford Wood, Netherseal St Peter's CofE (C) Primary School and St Michael's Church and the streets around them. Nearby you will also find Ashby de la Zouch Castle (4.3 miles north-east) and Moira Furnace Museum (1.5 miles north-east).
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job. The main factors are:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- Unusual colours or finishes
- What the surface is made of
Our prices are the same across the UK, with no extra for Acresford. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
Most customers in Acresford get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Derbyshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
