Derbyshire · England

Bath Repair for Acresford homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Acresford, with a one-year guarantee on every repair.

  • Repairs from £95
  • Holes from dropped items
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Acresford homes

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Bath repair in Acresford, done in place

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Common call-outs are for rust by the waste and overflow and damage done while the bathroom was being fitted, in cast iron enamel, pressed steel enamel and acrylic.

Big or small, it’s backed by a one-year guarantee in Acresford and across Derbyshire.

Location
Acresford (DE12)
Area hub
Derbyshire
Warranty
A year, on every repair
Price
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Signs you need bath repair in Acresford

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

Signs it’s time to call us include:

  • A kit repair that didn’t last
  • Chips on the rim or sides
  • Chips under the taps
  • Deep scratches in acrylic

What to look for in a quote

  • Aftercare advice
  • How soon you can use it again
  • Who will actually do the work
  • How your room will be protected

10 questions to ask before you book

What we can’t put right

A few problems are outside what a surface repair can do:

  • A steel bath rusted through
  • Cracks in acrylic we can’t reach from underneath
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Send us photos and we will tell you honestly.

Materials we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic

Aftercare tips

Simple care helps the repair last. We recommend:

  • Give the bath a quick rinse after use
  • Fix dripping taps early to stop staining and limescale
  • Make sure an acrylic bath is firm underfoot
  • Protect the bath with a towel when doing jobs nearby

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Should you replace it?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why choose Surface Doctor in Acresford

  • Every repair guaranteed for a year
  • Accredited with CHAS, Constructionline and SafeContractor
  • Colour-matched on site
  • Dust sheets down, tidy finish

Read our full price list or guide to resurfacing and replacement costs.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

For anyone letting property in or around Acresford, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

Where we work around Acresford

Acresford is about 4 miles south-west of Ashby-de-la-Zouch, in Derbyshire. Anywhere in DE12, we come to you. We cover all 532 towns and villages in Derbyshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 22 miles away.

Every address in DE12 is covered. That includes homes on Acresford Road and Measham Road. Nearby, we also work in Stretton en le Field (1 mile south), Donisthorpe (1 mile north-east), Netherseal (1 mile west), Oakthorpe (1 mile east) and Short Heath (1 mile north). Within a short drive, we also cover Swadlincote (4 miles north), Woodville (4 miles north), Upper Midway (5 miles north), Hilton (11 miles north), Midway (5 miles north) and Lower Midway (5 miles north).

Local landmarks in Acresford

We visit homes around Saltersford Wood, Netherseal St Peter's CofE (C) Primary School and St Michael's Church. Further afield, we also cover the area around Ashby de la Zouch Castle (4.3 miles north-east) and Moira Furnace Museum (1.5 miles north-east).

Map of Acresford © OpenStreetMap contributors

How it works

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you how long to leave it and how to look after it.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Let us know if it has been repaired before
  • Mention if the room is upstairs or in a flat

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Send pictures for a quote

Advice

Common questions in Acresford

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including older coloured suites.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is a cracked acrylic bath repairable?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

Can you quote from pictures?

Nearly always. If pictures don’t show enough, we will ask for another angle.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.