Derbyshire · England
Bath Re-enamelling for Overseal homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Overseal. Send photos for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring

How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take the best part of a day, including clearing up.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
About our bath re-enamelling in Overseal
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for wear marks under the taps and stains that won’t shift, on basins & shower trays, Victorian roll-tops and cast iron baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.

- Area
- Overseal (DE12)
- County
- Derbyshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Overseal
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Doing more than one item at once
Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
We price nearly every job from photos. This is what we need:
- Details of any past repairs
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Do you need bath re-enamelling in Overseal?
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
People normally call us when they notice something like this:
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
What your quote should include
- Aftercare advice
- Whether a trained technician does the job
- What prep work is covered
- The length of the guarantee and what it covers
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Aftercare tips
Once the work has cured, treat it gently:
- Repair dripping taps early
- Wash away dyes and oils after use
- Do not use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why choose Surface Doctor in Overseal
- Fixed prices from your photos
- Generally one visit, start to finish
- One-year guarantee on every repair
- Colour mixed on the day to match
Take a look at our prices page and guide to resurfacing and replacement costs.
Nearby places to Overseal
More services for Overseal
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Covering Overseal
Overseal is about 3 miles south of Swadlincote, in Derbyshire. Our repair technicians come to homes and businesses in Overseal and the surrounding area, so you do not need to take anything anywhere. We cover all 532 towns and villages across Derbyshire. Our nearest city page is Birmingham, about 23 miles away.
Every address in DE12 is covered. From Main Street, Manor School View and Hall Croft Avenue or a nearby road, a technician can come to you. We also travel to Short Heath (1 mile east), Spring Cottage (1 mile north-east), Linton Heath (1 mile north-west), Donisthorpe (1 mile south-east) and Mount Pleasant (1 mile north-west). Larger places within reach include Swadlincote (3 miles north), Woodville (3 miles north-east), Upper Midway (3 miles north), Hilton (10 miles north), Midway (3 miles north) and Lower Midway (3 miles north).
Near you in Overseal
In Overseal, that means homes near Overseal Primary School, Church of St Matthew and Donisthorpe Woodland Park. A little further out are Moira Furnace Museum (1.1 miles east) and Ashby Castle and associated formal garden (4.1 miles east).
Questions from Overseal
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your pictures and you will get one combined price.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How long does re-enamelling take?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
About our accreditations · Every repair comes with a one-year guarantee.

