Shropshire · England
Bath re-enamelling & resurfacing in Alderton, Shropshire
Full bath re-enamelling and resurfacing at your home in Alderton, with a one-year guarantee on every repair.
- Resurfacing from £350
- Stains that won’t shift
- A bath that stays dull however much you clean it
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
- Wash away dyes and oils after use
- Do not leave bottles, razors or sponges standing on the surface
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
How we handle bath re-enamelling in Alderton
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include an outdated colour you’d like to change and brown or grey marks that don’t clean off, in basins & shower trays, cast iron baths and Victorian roll-tops.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Alderton (SY4)
- County
- Shropshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About Alderton
Alderton is about 6 miles north of Shrewsbury, in Shropshire. Our technicians come to customers in Alderton and the surrounding area, so nothing has to leave your home. Alderton is one of 433 towns and villages in Shropshire we cover. We work right across the region, from Alderton to Birmingham (43 miles away).
Jobs in SY4 are booked in the same way as anywhere else. From Wem Road, Higher Road and Godings Lane or anywhere nearby, we can come to you. Close by, we cover Yorton (1 mile north-east), Clive (1 mile north-east), Myddle (2 miles west), Grinshill (2 miles east) and Barkers Green (4 miles north-east). We also work in nearby towns such as Shrewsbury (6 miles south), Oswestry (13 miles west), Market Drayton (13 miles north-east), Coleham (7 miles south), Kingsland (6 miles south) and Whitchurch (12 miles north).
Near you in Alderton
In Alderton, that means homes near Church of St Mary and The Red Castle pub and the streets around them. The closest station to Alderton is Yorton station, roughly 0.8 miles north-east. Well-known places in the area include Myddle Castle (1.7 miles west).
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Alderton. What changes the price is:
- The colour and finish to match
- Doing more than one item at once
- The type of damage
- Where the damage is and how we get to it
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
You can take the pictures on your phone. Ensure they show:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Any details about the material
Most clients in Alderton get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
What a repair can’t fix
It helps to know what we cannot do:
- A cast iron or steel bath that is cracked right through
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Common questions in Alderton
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Alderton. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- A fixed quote before you book
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
Read our prices page and resurfacing vs replacement cost guide.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes the best part of a day in most cases. We leave the room clean.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Related advice
Also near Alderton
Other services in Alderton
Landlord and trade work in Alderton
Landlords, letting agents and housing providers in Alderton use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
For anyone letting property in or around Alderton, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
