Shropshire · England
Bath Re-enamelling for Grinshill homes
Problem with your bath in Grinshill? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Brown or grey marks that don’t clean off
How it works
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. It normally takes the best part of a day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
- Clear the area around the damage
How to get a price
Upload photos of the damage and one of the entire item, and tell us you’re in Grinshill, and we’ll reply with a fixed price.
Related advice
About our bath re-enamelling in Grinshill
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We are frequently asked to fix a peeling or bubbling previous coating and a coloured bath you want in white, across acrylic baths, cast iron baths and basins & shower trays.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Where
- Grinshill (SY4)
- County
- Shropshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Grinshill
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. We charge the same wherever you are, so there’s no premium for Grinshill. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- A year’s guarantee on all work
- We leave the room as we found it
- A fixed quote before booking
- Colours mixed by hand to suit your surface
See our prices page or guide to resurfacing and replacement costs.
What affects the price in Grinshill
Resurfacing from £350. We charge the same across the UK, including Grinshill. The price reflects:
- Unusual colours or finishes
- What the surface is made of
- What kind of damage it is
- The size and number of damaged areas
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Before you send photos, a few simple things make all the difference:
- Natural light rather than flash
- Any details about the material
- Details of any past repairs
- A clear, close picture of the problem area
Most clients in Grinshill get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Our work in Grinshill
Grinshill is about 7 miles north of Shrewsbury, in Shropshire. From the centre of Grinshill to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in all 433 towns and villages across Shropshire. You can also see our page for Birmingham, about 41 miles away.
Every address in SY4 is covered, from the main roads to the quietest streets. Whether you live on High Street, Grove Lane and Sandy Lane or anywhere nearby, we can come to you. We also travel to Clive (1 mile north-west), Yorton (1 mile west), Alderton (2 miles west), Barkers Green (3 miles north) and Myddle (3 miles west). Further out, we also cover Shrewsbury (7 miles south), Oswestry (15 miles west), Market Drayton (11 miles north-east), Coleham (7 miles south), Kingsland (7 miles south) and Whitchurch (11 miles north).
What’s near Grinshill
Typical jobs here are in homes near Clive CofE Primary School and Church of All Saints and the streets around them. The closest station to Grinshill is Yorton station, about 1.3 miles west of the centre. Further afield, we also cover the area around Moreton Corbet Castle (2.3 miles east) and Morgan Library (3.5 miles north).
Also near Grinshill
What else we do in Grinshill
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What we’re called out for in Grinshill
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The things customers usually mention when they call are:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Before you book anyone
- How long it needs to cure
- What the guarantee covers, and for how long
- If travel is included in the price
- What prep work is covered
When a repair is not the answer
We will not take on work that will not last, so here’s what a repair cannot put right:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Grinshill
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
FAQs for Grinshill
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
What areas do you cover?
All of Shropshire, and the rest of the UK. There is no extra charge for travel.
Do you cover Grinshill?
We do. Technicians travel to Grinshill from across the region, and the price is the same as everywhere else.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Do not leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Have chips seen to early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
