Wolverhampton · England

Bath chip & crack repair in All Saints, Wolverhampton

Local bath repair for All Saints: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Holes from dropped items
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near All Saints

About our bath repair in All Saints

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in a single visit. If you are dealing with a chip where the taps sit and rust spots around the plughole, we can usually put it right, whatever the material.

Every repair comes with our one-year guarantee.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
All Saints (WV2, WV1, WV3)
County
Wolverhampton
Cover
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

Should you replace it?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why All Saints customers choose us

  • Typically one visit, start to finish
  • A year’s guarantee on all work
  • Work done at your home or business
  • Accredited with CHAS, Constructionline and SafeContractor

Read our prices page and guide to resurfacing and replacement costs.

Landlords, agents and businesses in All Saints

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

We carry out planned and one-off repairs for housing associations and facilities teams in Wolverhampton and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

How the visit works

We begin by going over the job with you. Next, we cover and mask everything nearby and we start. You can expect it to take two to three hours for most chips, and we will keep you posted as we go.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, normally the following day.

Getting ready for the visit

  • Clear the area around the damage
  • Let the surface dry out before the visit
  • Tell us if there are stairs or a lift

Get a quote

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.

Get a free quote

Related advice

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

How we price bath repair

Prices start from £95. Prices are worked out job by job, from your pictures. What matters most is:

  • Access to the area
  • The material
  • The colour and finish to match
  • Previous DIY repairs that have to come out

We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

It only takes a minute to photograph the damage. Please include:

  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • Details of any past repairs
  • What it’s made of, if you know

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

FAQs for All Saints

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

How quickly can you book me in?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Is repairing better than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Mention it when you send photos.

How long before I can use the bath?

Normally by the following day, though it depends on what we have done.

Which areas do you work in?

We cover the whole UK, including All Saints and the rest of Wolverhampton. Just include your postcode and we’ll confirm dates.

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

What happens next?

We come back with a fixed quote. You’re under no obligation.

Our work in All Saints

All Saints is about 1 mile south of Wolverhampton, in Wolverhampton. We travel to homes and businesses in All Saints and nearby villages, so there is no workshop to go to. All Saints is one of 96 towns and villages in Wolverhampton where we work. You can also see our page for Birmingham, about 12 miles away.

Here we cover the WV2, WV1 and WV3 postcode area. Jobs here include addresses on Pond Lane, The Square and Forge Road and the roads around them. With the A454 close by, All Saints is easy for our repair technicians to reach. We also cover the places around All Saints: Horseley Fields (1 mile north), Blakenhall (1 mile south-west), Graiseley (1 mile west), Rough Hills (1 mile south-east) and Wolverhampton (1 mile north). Within a short drive, we also cover Coseley (3 miles south-east), New Invention (4 miles north-east), Gornal (4 miles south), Perton (4 miles west), Tibbington (4 miles south-east) and Princes End (3 miles south-east).

What’s near All Saints

We visit homes around Catholic Church of St Mary and St John, East Park and All Saints Church and the streets around them. Nearby too are Duke of York pub (0.5 miles north-west), SS. Mary and John's Catholic Primary Academy (under half a mile south), Royal Wolverhampton School (0.9 miles south-west) and South Wolverhampton and Bilston Academy (1.1 miles south). The closest station to All Saints is Wolverhampton station, roughly 0.6 miles north. Well-known places in the area include Royal Hospital (under half a mile north) and Dudley Castle (4.8 miles south). Green spaces nearby include Peascroft Wood and Beacon Hill.

Map of All Saints © OpenStreetMap contributors

Honest limits

A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Acrylic cracks with no access behind them
  • A steel bath rusted through

Send us photos and we’ll tell you honestly before booking.

Materials we work on in All Saints

  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

Looking after it afterwards

How the surface is treated afterwards matters:

  • Get a dripping tap fixed promptly
  • Get any new chip repaired before it rusts
  • If an acrylic bath flexes, have its feet adjusted
  • Keep metal cans and razors off the surface

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.

Materials and what they mean for the repair

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.