Shropshire · England
Bath re-enamelling & resurfacing in Romsley, Shropshire
Full bath re-enamelling and resurfacing for homes and businesses in Romsley and across Shropshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Wear marks under the taps
Bath re-enamelling in Romsley without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, we can typically put it right.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Area
- Romsley (WV15, DY12)
- Region
- Shropshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- How much damage there is
- The type of damage
- The material
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- A picture taken from further back
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Signs you need bath re-enamelling in Romsley
Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
If you can see any of these, send us a picture:
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
- Wear marks under the taps
- Brown or grey marks that do not clean off
What to look for in a quote
- What aftercare is recommended
- When it can be used again
- What protection goes down before work starts
- If travel is included in the price
Honest limits
A repair is not right for every job, including:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly before booking.
Materials we work on in Romsley
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Landlord and trade work in Romsley
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
How it works
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow the best part of a day from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
- Make sure the area is dry
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Related advice
Also near Romsley
Other services in Romsley
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Romsley and the surrounding area
Romsley is about 5 miles north of Bewdley, in Shropshire. Across the WV15 area, we carry out the work at your property. Romsley is one of 433 towns and villages in Shropshire we cover. You can also see our page for Birmingham, about 18 miles away.
Postcode districts we cover here: WV15 and DY12. That includes homes on Sham Lane and Romsley Lane. If you’re just outside Romsley, we cover Nash End (1 mile south-west), Shatterford (1 mile south-east), Alveley (1 mile north-west), Good's Green (1 mile south) and Stanley (2 miles west). We also work in nearby towns such as Madeley (14 miles north), Bridgnorth (7 miles north-west), Shifnal (15 miles north), Broseley (13 miles north-west), Albrighton (13 miles north) and Much Wenlock (14 miles north-west).
What’s near Romsley
We visit homes around Red Lion pub and Severn Valley Country Park. Well-known places in the area include Crundles Farm (3.9 miles south) and Kidderminster Hospital and Treatment Centre (5 miles south-east). For a walk, there is Kinver Edge.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Do not leave a chip unrepaired
- Wash away dyes and oils after use
- Do not use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
FAQs for Romsley
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and we’ll quote them together.
About our accreditations · Every repair comes with a one-year guarantee.
