Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Anderton, Cheshire West and Chester
Full bath re-enamelling and resurfacing in Anderton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
Do you need bath re-enamelling in Anderton?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People normally call us when they notice something like this:
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
- Thin, worn enamel in places
What your quote should include
- Whether there are any call-out or travel charges
- What happens if they find more damage
- How long the guarantee is and what it covers
- How the room is protected while they work
How we handle bath re-enamelling in Anderton
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include chips and rust in more than one place and a period or roll-top bath worth keeping, on basins & shower trays, cast iron baths and pressed steel baths.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Area
- Anderton (CW9, CW8)
- County
- Cheshire West and Chester
- Cover
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Where we work around Anderton
Anderton is about 1 mile north-west of Northwich, in Cheshire West and Chester. Whether you’re in the middle of Anderton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in all 224 towns and villages in Cheshire West and Chester, from the larger towns to small villages. You can also see our page for Manchester, about 19 miles away.
Our visits in CW9 and CW8 work the same way as everywhere else we cover. We regularly work on streets such as Old Road, New Road and Daisy Bank Lane. We also cover the places around Anderton: Winnington (1 mile south), Barnton (1 mile west), Northwich (1 mile south-east), Comberbach (1 mile north) and Greenbank (2 miles south). Larger places within reach include Winsford (6 miles south), Frodsham (8 miles west), Hoole (15 miles west), Whitby (15 miles west), Newtown (15 miles west) and Over (6 miles south).
Landmarks near Anderton
Around Anderton, we work in homes near Hartford Church of England High School, Stanley Arms and Verdein Park. Nearby too are St Luke (0.6 miles south) and Barnton Community Nursery and Primary School (0.9 miles west). The closest station to Anderton is Greenbank station, roughly 1.6 miles south. Other landmarks nearby include Northwich Infirmary (1 mile south-east). The countryside around Anderton includes Neumann's Flash and Marbury Reedbed Nature Reserve.
Also near Anderton
More services for Anderton
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Prices and what affects them
Prices start from £350. You will know the full cost before you book. We look at:
- How much damage there is
- The material and finish
- The colour and finish to match
- Where the damage is and how we get to it
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A photo taken from further back
- A close-up of the damage, in focus
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Landlord and trade work in Anderton
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
How to care for the repair
To keep it looking its best:
- Rinse off hair dye, oils and bath bombs right away
- Never use suction bath mats
- Store bottles off the bath
- Fix dripping taps quickly
Wipe the bath dry after use where you can, and rinse off any bath products.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Questions from Anderton
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Do you cover Anderton?
Yes. We work across the UK and come to Anderton and the rest of Cheshire West and Chester. Send us photos for a fixed quote, or call 0345 017 0787.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
