Hampshire · England

Bath re-enamelling & resurfacing in East Anton, Hampshire

Fixed-price bath re-enamelling in East Anton and the surrounding area, generally in one visit and guaranteed for a year.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in East Anton?

About East Anton

East Anton is about 1 mile north-east of Andover, in Hampshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover all 683 towns and villages in Hampshire. Our nearest city page is London, about 62 miles away.

Our technicians cover all of SP11. Whether you live on Cobb Drive, Long Barn Road and Pasture Walk or a nearby road, a technician can come to you. Other places close to East Anton include Knights Enham (1 mile north-west), Finkley (1 mile north-east), Finkley Down (1 mile south-east), Smannell (1 mile north-east) and Enham Alamein (1 mile north). Larger places within reach include Winchester (13 miles south-east), Hyde (13 miles south-east), Tidworth (9 miles west), Weeke (12 miles south-east), Kempshott (14 miles east) and Stanmore (13 miles south-east).

Around East Anton

Around East Anton, we work in homes near St Paul Church Centre, Winton Community Academy and Winton Community Academy, among other places. Other local landmarks include Endeavour Primary School (less than half a mile north) and The Oak pub (0.9 miles north-east). For rail, the closest station is Andover station, roughly 1.6 miles south-west of the centre. Well-known places in the area include Andover War Memorial Hospital (1.5 miles south-west) and Finkley Down Farm Museum (0.6 miles south-east). Green spaces nearby include Mill Lake and Anton Lakes.

Map of East Anton © OpenStreetMap contributors

About our bath re-enamelling in East Anton

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Our technicians work on pressed steel baths, cast iron baths and acrylic baths, and common reasons people contact us are chips and rust in more than one place and a bath that stays dull however much you clean it.

All our work comes with our one-year guarantee.

Location
East Anton (SP11)
Region
Hampshire
Cover
One year on every repair
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Landlords, agents and businesses in East Anton

We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Questions from East Anton

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, access to the room.

Is there a call-out fee?

We don’t add a call-out fee. The fixed price covers the visit and the work.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Can you do the outside of a roll-top?

Yes. Inside and out if you’d like.

Is there any odour?

There can be some smell while we work. It fades as everything cures.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

How it works

We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day. We leave the room clean.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Ensure the room can be ventilated
  • Keep pets and children out of the room while we work
  • Let us know if it has been repaired before

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.

Send pictures for a quote

Advice

When a repair isn’t the answer

Not everything can be repaired, and we would rather say so up front. We cannot fix:

  • A poorly supported acrylic bath, until it’s firmed up
  • A metal bath with a through crack
  • Damage hidden under a previous coating, until it’s stripped back

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths

How we price bath re-enamelling

Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:

  • Whether we combine several jobs
  • The size and number of damaged areas
  • The colour and finish to match
  • The material and finish

Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Getting a price from pictures

Photographing the damage takes a minute. Please include:

  • Any details about the material
  • A clear, close picture of the problem area
  • Where you are, by postcode
  • Whether it’s been repaired or coated before

For a price in East Anton, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

When to call us in East Anton

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

Signs it’s time to call us include:

  • A bath in a colour that no longer suits
  • A period or roll-top bath worth keeping
  • Stains that won’t shift
  • A coating lifting around the plughole

Comparing quotes

  • How the colour is matched
  • What happens if they find more damage
  • Whether cleaning and preparation are in the price
  • What the guarantee covers, and for how long

How to compare quotes

Aftercare tips

Most damage we see is avoidable. These habits help:

  • A dripping tap should be fixed promptly
  • Avoid suction-cup mats
  • Rinse off hair dye, oils and bath bombs straight away
  • Clean with a soft cloth and mild detergent

Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.