Hampshire · England

Bath Re-enamelling in Anna Valley

Full bath re-enamelling and resurfacing for homes and businesses in Anna Valley and across Hampshire. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Anna Valley homes

Repair or replace: which is better?

Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • No extra charge for your area
  • Fixed prices from your pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • Most jobs done in one visit

Take a look at our pricing or resurfacing vs replacement cost guide.

Bath re-enamelling in Anna Valley, done in place

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include worn patches where water runs and sits and a bath that stays dull however much you clean it, in acrylic baths, Victorian roll-tops and pressed steel baths.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Area
Anna Valley (SP11)
County
Hampshire
Cover
One year on every repair
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Your questions about bath re-enamelling in Anna Valley

Do you resurface freestanding baths?

Yes, often. We resurface the inside, and the outside can be refinished too.

Can you resurface a pink bath in white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

What happens next?

You’ll get a fixed quote back. You are under no obligation.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.

How much does bath re-enamelling cost in Anna Valley?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

About Anna Valley

Anna Valley is about 2 miles south-west of Andover, in Hampshire. Clients in Anna Valley get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 683 places across Hampshire. Our jobs stretch from Anna Valley to London (about 65 miles away).

Here we cover the SP11 postcode area. Whether you live on Taskers Drive, White Oak Way and Foundry Road or anywhere nearby, a technician can come to you. Other places close to Anna Valley include Little Ann (1 mile south-west), Abbotts Ann (1 mile west), Red Rice (1 mile south), Monxton (2 miles west) and Amport (3 miles west). Further out, we also cover Winchester (12 miles south-east), Chandler's Ford (15 miles south), Romsey (14 miles south), Hyde (12 miles south-east), Tidworth (8 miles north-west) and Weeke (11 miles south-east).

Near you in Anna Valley

We visit homes around Church of All Saints, John Hanson Community School and Balksbury Junior School and the streets around them. Anna Valley’s nearest station is Andover station, roughly 1.4 miles north-east of the centre. Well-known places in the area include Andover War Memorial Hospital (1.6 miles north) and Andover Museum (1.7 miles north-east). Open spaces near Anna Valley include Anton Lakes and Mill Lake.

Map of Anna Valley © OpenStreetMap contributors

What affects the price in Anna Valley

Resurfacing from £350. Every quote is fixed and free. What we look at:

  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas
  • Doing more than one item at once

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.

Getting a price from photos

You can take the photos on your phone. Just ensure we can see:

  • Where you are, by postcode
  • A photo taken from further back
  • Good light, ideally daylight, without flash glare
  • A coin or ruler next to the damage for scale

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

How it works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the next day, the bath is ready.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Keep pets and children out of the room while we work
  • Tell us about any previous repairs or coatings

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Get a fixed quote

Related advice

When we would advise against a repair

A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:

  • A metal bath with a through crack
  • Anything hidden under an old coating, until we remove it
  • An acrylic bath that flexes badly underfoot

If in doubt, send pictures and we will say what we think.

Materials we work on in Anna Valley

  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays

Do you need bath re-enamelling in Anna Valley?

Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.

If you can see any of these, send us a picture:

  • A coating lifting around the plughole
  • Brown or grey marks that don’t clean off
  • An original cast iron bath that needs restoring
  • An outdated colour you’d like to change

Questions to ask before booking

  • What aftercare is recommended
  • How your room will be protected
  • How changes to the job are handled
  • How soon you can use it again

How to compare quotes

What your bath is made of matters

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

How to look after the repair

It’s all simple stuff, just a few sensible habits:

  • Respect the curing time we give you
  • Wipe the bath dry after use in hard water areas
  • Keep toiletries on a shelf rather than in the bath
  • Stick to gentle, non-abrasive cleaners

Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.

On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.