Hampshire · England
Bath Re-enamelling for Monxton homes
Bath re-enamelling in Monxton without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Thin, worn enamel in places
What we can’t put right
A repair is not always the answer, and we’d rather say so up front. We cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Bath re-enamelling at your home in Monxton
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on basins & shower trays, Victorian roll-tops and pressed steel baths, and common reasons people contact us are a period or roll-top bath worth keeping and an old resurfacing that’s failing.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Monxton (SP11)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
What we do, step by step
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take most of the day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Open a window if you can
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Towns and villages near Monxton
What else we do in Monxton
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- The material
- The colour and finish to match
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
It only takes a minute to photograph the damage. Try to send:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Details of any past repairs
- One picture of the entire bath
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before booking.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- One-year guarantee on every repair
- We come to you, anywhere in the UK
See our pricing or bath cost comparison.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Store bottles off the bath
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
FAQs for Monxton
What happens next?
You’ll get a fixed quote back, usually with dates to choose from. You’re under no obligation.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Can you fix a peeling bath coating?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Monxton and nearby
Monxton is about 3 miles west of Andover, in Hampshire. Jobs in Monxton are booked in like any other job: a fixed quote from photos, then a visit to do the work. Monxton is one of 683 places in Hampshire we cover. Our nearest city page is London, about 66 miles away.
We work across the SP11 postcode area and the streets around it. Streets in the area include High Street, Green Lane and Abbotts Ann Road, and we cover them all. Close by, we cover Amport (1 mile west), Abbotts Ann (1 mile south-east), Fox (1 mile south-west), Little Ann (2 miles south-east) and Anna Valley (2 miles east). Within a short drive, we also cover Winchester (14 miles south-east), Andover (3 miles east), Romsey (14 miles south), Hyde (14 miles south-east), Tidworth (6 miles north-west) and Weeke (13 miles south-east).
Local landmarks in Monxton
Around Monxton, we work in homes near Church of St Mary, John Hanson Community School and The Black Swan Public House and the streets around them. The nearest railway station is Andover station, roughly 2.8 miles east. Other landmarks nearby include Andover Museum (3.4 miles east) and Andover War Memorial Hospital (2.8 miles north-east). Green spaces nearby include Anton Lakes and Mill Lake.
About our accreditations · Every repair comes with a one-year guarantee.
