Cornwall · England
Bath Re-enamelling in Antony
Fixed-price bath re-enamelling in Antony and the surrounding area, typically in one visit.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
About our bath re-enamelling in Antony
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for several chips and rust patches and an old resurfacing that’s failing, in pressed steel baths, Victorian roll-tops and acrylic baths.
Big or small, you get the same one-year guarantee in Antony and across Cornwall.
- Location
- Antony (PL11)
- Region
- Cornwall
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
To be straight with you, some problems need a different fix:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- How many areas need work
- Any earlier repairs that need removing first
- Unusual colours or finishes
- The material
Our prices are the same across the UK, with no extra for Antony. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- A picture taken from further back
- Details of any past repairs
- The postcode, so we can plan the visit
- One sharp close-up of the damage
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Antony: your questions answered
What areas do you cover?
Across the UK, and that includes Antony. Prices do not change with location.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How long is the bath unusable?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and we will quote them together.
What happens once I’ve sent pictures?
You will get a fixed quote back, plus dates. You’re under no obligation.
Other services in Antony
Landlord and trade work in Antony
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Cornwall and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Straight answers about what a repair can do
- Most jobs done in one visit
- No extra charge for your area
- No need to remove anything
Read our full price list or resurfacing vs replacement cost guide.
What happens on the day
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear the area around the damage
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
Ask for a price
If you are in Antony and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Antony and nearby
Antony is about 3 miles south of Saltash, in Cornwall. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Antony is one of 644 places in Cornwall where we work.
Postcode districts we cover here: PL11. From Abbotscourt Lane, Antony Hill and St Johns Lane or anywhere nearby, a technician can come to you. If you’re just outside Antony, we cover St John (1 mile south-east), Freathy (2 miles south), Maryfield (2 miles north-east), Sheviock (2 miles west) and Insworke (2 miles south-east). Larger places within reach include Stonehouse (4 miles east), Saltash (3 miles north), Liskeard (11 miles north-west), Addington (11 miles north-west), Looe (9 miles west) and Burraton Coombe (3 miles north).
Local landmarks in Antony
Typical jobs here are in homes near Torpoint Community College, Church of St James and Antony Church of England School, among other places. Antony’s nearest station is St Germans station, roughly 3.1 miles north-west. A little further out are Plymouth General Hospital (3 miles east) and Trematon Castle (2.2 miles north). Open spaces near Antony include Penlee Battery.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Aftercare tips
After the repair has cured, a few habits help it last:
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Don’t leave a chip unrepaired
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
