Cornwall · England
Bath re-enamelling & resurfacing in Maryfield, Cornwall
Damaged bath in Maryfield? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- An old resurfacing that’s failing
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
About our bath re-enamelling in Maryfield
Most baths are re-enamelled in a day, and you can use the bath the next day. Nothing is disconnected or removed. Our repair technicians work on basins & shower trays, cast iron baths and pressed steel baths, and the jobs we see most are a coloured bath you want in white and an original cast iron bath that needs restoring.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Maryfield (PL11)
- Area hub
- Cornwall
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
How the visit works
We agree an arrival time beforehand. Once we’re there, the work takes a full day for most jobs. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the day after.
How to prepare
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
Maryfield and nearby
Maryfield is about 2 miles south of Saltash, in Cornwall. From the centre of Maryfield to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 644 towns and villages in Cornwall.
Our visits in PL11 work the same way as everywhere else we cover. Nearby, we also work in Wilcove (1 mile east), Torpoint (1 mile south-east), Antony (2 miles south-west), St John (2 miles south-west) and Insworke (2 miles south). Larger places within reach include Stonehouse (3 miles east), Liskeard (12 miles north-west), Addington (12 miles north-west), Looe (11 miles west), Callington (9 miles north-west) and Shutta (10 miles west).
What’s near Maryfield
Typical jobs here are in homes near Antony, St Budeaux Library and Carbeile Junior School and the streets around them. Also close by are Church of St Philip and St James (less than half a mile south-east), Torpoint Community College (0.7 miles south-east) and Carbeile Inn (0.8 miles south-east). Maryfield’s nearest station is Saltash station, about 1.6 miles north of the centre. Other landmarks nearby include Armada Centre (3.4 miles east) and Plymouth General Hospital (1.7 miles south-east). For a walk, there is Penlee Battery.
Signs you need bath re-enamelling in Maryfield
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
Keep an eye out for any of the following:
- Several chips and rust patches
- An outdated colour you’d like to change
- Wear marks under the taps
- A peeling or bubbling previous coating
What to look for in a quote
- What prep work is covered
- What aftercare is recommended
- When it can be used again
- Is the price fixed, and does it include VAT?
Common questions in Maryfield
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
Repairing versus replacing in Maryfield
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Work done at your home or business
- No need to remove anything
- No extra charge for your area
- A fixed quote before booking
See our prices page and bath cost comparison.
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How hard the colour is to match
- Any earlier repairs that need removing first
- What the surface is made of
- How many items we do on one visit
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
You can typically get a fixed quote without us visiting. To make it quick:
- What it’s made of, if you know
- A photo taken from further back
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Other services in Maryfield
About our accreditations · Every repair comes with a one-year guarantee.
