Lincolnshire · England

Bath Re-enamelling for Anwick homes

Full bath re-enamelling and resurfacing at your home in Anwick, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Anwick

How we handle bath re-enamelling in Anwick

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are frequently asked to fix a roll-top that’s seen better days and an old resurfacing that’s failing, on cast iron baths, pressed steel baths and basins & shower trays.

Your repair is guaranteed for a year, as with every job we do.

Before and after: an old basin refinished to bright white
Where
Anwick (NG34)
County
Lincolnshire
Cover
One year on every repair
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

What happens on the day

We work cleanly and quietly. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the day after, the bath is ready.

How to prepare

  • Let the surface dry out before the visit
  • Let us know about parking or access
  • Keep pets and children out of the room while we work

How to get a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Get a free quote

Read more

Covering Anwick

Anwick is about 4 miles north-east of Sleaford, in Lincolnshire. Wherever you are in the NG34 postcode area, we carry out the work at your property. Our technicians cover 732 places in Lincolnshire, from the larger towns to small villages. We work right across the region, from Anwick to Leeds (73 miles away).

Every address in NG34 is covered, from the main roads to the quietest streets. You’ll find streets such as River Lane, The Gardens and Main Road, all of which we cover. We also travel to Ewerby (2 miles south), Evedon (2 miles south-west), Ruskington (2 miles west), Dorrington (3 miles north-west) and Digby (3 miles north-west). Larger places within reach include Boston (14 miles east), Grantham (15 miles south-west), Sleaford (4 miles south-west), North Hykeham (15 miles north-west), Horncastle (15 miles north-east) and Woodhall Spa (9 miles north-east).

Around Anwick

Around Anwick, we work in homes near Church of St Edith, among other places. The nearest railway station is Ruskington station, about 1.7 miles west. Other landmarks nearby include Sleaford Castle (4.3 miles south-west) and North Ings Farm Museum (1.7 miles north-west).

Map of Anwick © OpenStreetMap contributors

Prices and what affects them

Prices start from £350. You will not pay by the hour. The price depends on:

  • Whether old repairs or coatings need taking off
  • Access to the area
  • The colour and finish to match
  • Doing more than one item at once

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Quotes from your photos

Good photos mean an accurate price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale
  • One picture of the whole bath

To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Materials and what they mean for the repair

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Signs you need bath re-enamelling in Anwick

Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.

Typical reasons for a call-out include:

  • A dull, rough surface that will not come clean
  • Lots of chips and rust spots
  • A period or roll-top bath worth keeping
  • An outdated colour you’d like to change

Before booking anyone

  • What happens if they find more damage
  • How to care for the finish
  • Whether there are any call-out or travel charges
  • Whether the price is fixed and includes VAT

Choosing a repair company

Aftercare tips

It’s all simple stuff:

  • Never use suction bath mats
  • Keep toiletries on a shelf rather than in the bath
  • Fix dripping taps quickly
  • Rinse off hair dye, oils and bath bombs straight away

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further.

Questions from Anwick

What areas do you cover?

All of Lincolnshire, and the rest of the UK. Travel is included in the price.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.

Do the materials smell?

There can be some smell while we work. It fades as everything cures.

What happens next?

You’ll get a fixed quote back. You are under no obligation.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

How quickly can you book me in?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

How long is the bath unusable?

One day for most baths, ready the following day. We will confirm timings when we quote.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Should you replace it?

Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.

Why Anwick customers choose us

  • Free fixed quotes from pictures
  • Technicians who travel to you, UK-wide
  • Colour-matched on site
  • We leave the room as we found it

Take a look at our pricing and resurfacing vs replacement cost guide.

Landlords, agents and businesses in Anwick

We work for landlords, letting agents and housing providers in Anwick as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.