Argyll and Bute · Scotland
Bath Re-enamelling in Ardentinny
Our repair technicians come to Ardentinny for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Several chips and rust patches
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Ardentinny
We do not move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Whether it’s an old resurfacing that’s failing and staining under the taps and around the waste, we can typically put it right, on basins & shower trays, Victorian roll-tops and cast iron baths alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Ardentinny (PA23)
- Region
- Argyll and Bute
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Don’t leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- The material
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A picture taken from further back
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Ardentinny and the surrounding area
Ardentinny is about 8 miles west of Helensburgh, in Argyll and Bute. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Ardentinny is one of 118 towns and villages in Argyll and Bute we cover. Our jobs stretch from Ardentinny to Glasgow (28 miles away).
All of PA23 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Coulport (2 miles east), Ardpeaton (2 miles south-east), Rahane (3 miles east), Mambeg (3 miles north-east) and Blairmore (3 miles south). Larger places within reach include Helensburgh (8 miles east), Dunoon (6 miles south), Rothesay (15 miles south), Rhu (5 miles east), Garelochhead (4 miles north-east) and Port Bannatyne (14 miles south-west). If you’re somewhere remote, ring us first and we will plan the trip.
Landmarks near Ardentinny
Locally, our jobs take us to homes close to Ardentinny Church, among other places. The closest station to Ardentinny is Garelochhead station, about 4.1 miles north-east of the centre. A little further out are Cowal Community Hospital (5.8 miles south) and Cove Castle (3.9 miles south-east). Open spaces near Ardentinny include Clach Bheinn and Loch Eck.
When a repair isn’t the answer
A repair is not always the answer, and we would rather say so up front. We cannot fix:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly.
Materials we work on in Ardentinny
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Repair or replace: which is better?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
What you get with us
- Typically one visit, start to finish
- Rooms protected and left tidy
- A fixed quote before you book
- CHAS, Constructionline and SafeContractor accredited
Read our full price list and resurfacing vs replacement cost guide.
Other services in Ardentinny
The process
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
- Tell us about any previous repairs or coatings
Getting a price
To get a price, send a couple of pictures through our quote form or call us. We will say immediately if a repair is the right fix.
Advice
Ardentinny: your questions answered
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Do you cover Ardentinny?
Yes, we do. Technicians travel to Ardentinny from across the region, and the price is the same as everywhere else.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
What we are called out for in Ardentinny
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
What your quote should include
- Whether cleaning and preparation are in the price
- Aftercare advice
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
