Argyll and Bute · Scotland
Bath Re-enamelling for Blairmore homes
Damaged bath in Blairmore? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A coloured bath you want in white
What affects the price in Blairmore
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- The material
- Any earlier repairs that need removing first
- The colour and finish to match
- Doing more than one item at once
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Bath re-enamelling in Blairmore without replacing anything
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Whether it’s enamel that’s lost its shine and feels rough and brown or grey marks that don’t clean off, we can usually put it right, whatever the material.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Blairmore (PA23)
- County
- Argyll and Bute
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Nearby places to Blairmore
What else we do in Blairmore
Signs you need bath re-enamelling in Blairmore
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- A roll-top that is seen better days
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- An old resurfacing that’s failing
What your quote should include
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- When it can be used again
- If travel is included in the price
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
What we cannot put right
It helps to know what we can’t do:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
FAQs for Blairmore
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you fix a peeling bath coating?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How long is the bath unusable?
Usually one day, with the bath ready the next day. A badly pitted bath can need a second day.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Should you replace it?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Colour mixed on the day to match
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- Rooms protected and left tidy
Take a look at our pricing and bath cost comparison.
Where we work around Blairmore
Blairmore is about 6 miles north-west of Greenock, in Argyll and Bute. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. We cover 118 places in Argyll and Bute, from the larger towns to small villages. Our nearest city page is Glasgow, about 26 miles away.
All of PA23 is within our area, from the main roads to the quietest streets. That includes homes on Shore Road and High Road. Nearby, we also work in Kilcreggan (3 miles east), Trumpethill (4 miles south-east), Midton (4 miles south-east), Ashton (4 miles south-east) and Gourock (4 miles south-east). Further out, we also cover Helensburgh (7 miles east), Dunoon (3 miles south), Rothesay (13 miles south-west), Rhu (5 miles east), Garelochhead (7 miles north-east) and Port Bannatyne (12 miles south-west). For island and remote addresses, ring us first and we will plan the trip.
What’s near Blairmore
Typical jobs here are in homes near Strone Church, among other places. The nearest railway station is Gourock station, roughly 3.9 miles south-east. Well-known places in the area include Cowal Community Hospital (2.8 miles south-west) and Cove Castle (1.7 miles east). Green spaces nearby include Loch Loskin and Lyle Hill.
Landlords, agents and businesses in Blairmore
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Blairmore as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
