Argyll and Bute · Scotland
Bath re-enamelling & resurfacing in Port Bannatyne, Argyll and Bute
Full bath re-enamelling and resurfacing in Port Bannatyne, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Port Bannatyne without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Common call-outs are for enamel that’s lost its shine and feels rough and lots of chips and rust spots, in pressed steel baths, Victorian roll-tops and cast iron baths.
All our work comes with our one-year guarantee, wherever you are in Argyll and Bute.
- Where
- Port Bannatyne (PA20)
- Region
- Argyll and Bute
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
When to call us in Port Bannatyne
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
These are the problems we are asked about most:
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
What to look for in a quote
- How the room is protected while they work
- If travel is included in the price
- What prep work is covered
- What happens if the damage is worse than the photos show
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Repair dripping taps early
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Port Bannatyne and nearby
Port Bannatyne is about 13 miles south-west of Greenock, in Argyll and Bute. From the centre of Port Bannatyne to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 118 places in Argyll and Bute, from the larger towns to small villages. We work right across the region, from Port Bannatyne to Glasgow (31 miles away).
Our visits in PA20 are booked in the same way as anywhere else. We regularly work on streets such as Pointhouse Crescent, Creek Drive and High Road. Neighbouring places we cover include Ardbeg (1 mile south-east), Rothesay (2 miles south), Craigmore (2 miles south-east), Toward (4 miles east) and Innellan (5 miles north-east). Further out, we also cover Dunoon (9 miles north-east), An Tairbeart (13 miles west) and Sandbank (10 miles north-east). Some remote addresses need extra planning, so call us to arrange it.
Local landmarks in Port Bannatyne
Typical jobs here are in homes near Rothesay Academy and Port Bannatyne Church and the streets around them. Other landmarks nearby include Kames Castle (1.2 miles west) and Victoria Hospital (2.1 miles south). The countryside around Port Bannatyne includes Greenan Loch and Kames Hill.
What a repair cannot fix
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Common questions in Port Bannatyne
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you come to Port Bannatyne?
We do. We send a technician to Port Bannatyne for every job, and the price is the same as everywhere else.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can you quote from pictures?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
Also in Port Bannatyne
Repair or replace in Port Bannatyne?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Why book with us
- We will tell you if it’s not worth repairing
- A fixed quote before you book
- Most jobs done in one visit
- Colour-matched on site
See our full price list or resurfacing vs replacement cost guide.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For landlords and businesses
Landlords, letting agents and housing providers in Port Bannatyne use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Keep a parking space free if you can
Get a quote
To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
