Argyll and Bute · Scotland
Bath Re-enamelling for Ardpeaton homes
Bath re-enamelling for Ardpeaton, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A coloured bath you want in white
Bath re-enamelling in Ardpeaton, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair Victorian roll-tops, basins & shower trays and cast iron baths, and people most frequently call us about a coating lifting around the plughole and chips and rust in more than one place.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Ardpeaton (G84)
- Region
- Argyll and Bute
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What happens on the day
Arrival times are agreed in advance. Once we are there, the work takes the best part of a day in most cases. The room is left tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Clear the area around the damage
- Open a window if you can
- Let the surface dry out before the visit
Get a quote
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
When to call us in Ardpeaton
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Contact us if you’ve noticed:
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
- A roll-top that is seen better days
Comparing quotes
- Whether they match the colour on site
- How changes to the job are handled
- The length of the guarantee and what it covers
- Whether a trained technician does the job
Also near Ardpeaton
What else we do in Ardpeaton
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Where we work around Ardpeaton
Ardpeaton is about 6 miles west of Helensburgh, in Argyll and Bute. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover 118 places across Argyll and Bute, from the larger towns to small villages. Our nearest city page is Glasgow, about 26 miles away.
Postcode districts we cover here: G84. We regularly work on streets such as Ardpeaton Gardens and Shore Road. If you are just outside Ardpeaton, we cover Coulport (1 mile north), Cove (2 miles south), Rahane (2 miles north-east), Clynder (2 miles east) and Mambeg (3 miles north). Further out, we also cover Helensburgh (6 miles east), Dunoon (6 miles south-west), Rothesay (15 miles south-west), Rhu (3 miles east), Port Bannatyne (14 miles south-west) and Sandbank (4 miles south-west).
Local landmarks in Ardpeaton
In Ardpeaton, that means homes near Coulport and the streets around them. The nearest railway station is Garelochhead station, roughly 4 miles north-east. Well-known places in the area include Cowal Community Hospital (5.3 miles south-west) and Cove Castle (2.2 miles south).
FAQs for Ardpeaton
Do you cover the whole of Argyll and Bute?
Across the UK. Our prices are the same everywhere.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do you come to Ardpeaton?
We do. Technicians travel to Ardpeaton from across the region, and the price is the same as everywhere else.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Access to the area
- How many areas need work
- What the surface is made of
- Whether old repairs or coatings need taking off
Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A photo taken from further back
- The material, if you know it
- Where you are, by postcode
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs straight away
- Do not leave bottles, razors or sponges standing on the surface
- Do not use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
