Dundee · Scotland

Bath re-enamelling & resurfacing in Ardler, Dundee

Full bath re-enamelling and resurfacing at your home in Ardler, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Ardler

What a repair can’t fix

A repair is not right for every job, for example:

  • Leaks from fittings rather than the bath
  • Anything hidden under an old coating, until we remove it
  • A metal bath with a through crack

If in doubt, send pictures and we’ll say what we think before you book.

Surfaces we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths

Bath re-enamelling at your home in Ardler

We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We work on basins & shower trays, Victorian roll-tops and acrylic baths, and common reasons people contact us are an outdated colour you’d like to change and an old resurfacing that’s failing.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Area
Ardler (DD3, DD2)
County
Dundee
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Your questions about bath re-enamelling in Ardler

Will the new finish last?

Look after it and it lasts. Gentle cleaning, no suction mats.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you fix a peeling bath coating?

Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.

Do you work in Ardler?

Yes, we do. Technicians travel to Ardler from across the region, and the price is the same as everywhere else.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.

What areas do you cover?

All of Dundee, and the rest of the UK. There is no extra charge for travel.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before.

Where we work around Ardler

Ardler is about 2 miles north-west of Dundee, in Dundee. Clients in Ardler get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Ardler is one of 50 towns and villages in Dundee where we work. Our nearest city page is Edinburgh, about 38 miles away.

Jobs in DD3 and DD2 are booked in the same way as anywhere else. Whether you live on Troon Road, Baird Avenue and Telford Road or a nearby road, a technician can come to you. Being close to the A90, Ardler is simple for us to get to. We also cover the places around Ardler: St Marys (1 mile north), Dryburgh (1 mile south-west), Lochee (1 mile south), Camperdown (1 mile west) and Charleston (1 mile south-west). Further out, we also cover Broughty Ferry (6 miles east), Monifieth (7 miles east), Barnhill (6 miles east), Pitkerro (3 miles east), Whitfield (3 miles east) and Douglas (4 miles east).

What’s near Ardler

We visit homes around Balgay Hill, Dundee and Scottish School of Contemporary Dance. Nearby too are Lawside Academy (0.5 miles east) and Cox Branch Library (1.2 miles south). The nearest railway station is Invergowrie station, roughly 2.7 miles south-west. Nearby you’ll also find Strathmartine Castle (1.9 miles north) and King's Cross Hospital (1.4 miles south-east). The countryside around Ardler includes Trottick Mill Ponds and Balgay Hill.

Map of Ardler © OpenStreetMap contributors

How to look after the repair

After the repair has cured, a few habits help it last:

  • A dripping tap should be fixed promptly
  • Wash away dyes and oils after use
  • Keep toiletries on a shelf rather than in the bath
  • Wipe the bath dry after use in hard water areas

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

What happens on the day

Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. Allow a full day, and we will keep you posted as we go.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Clear the area around the damage
  • Open a window if you can
  • Mention any parking restrictions or tricky access

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.

Get a fixed quote

Read more

Signs you need bath re-enamelling in Ardler

Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

You may need us if you’ve spotted any of these:

  • A peeling or bubbling previous coating
  • A coloured bath you want in white
  • Brown or grey marks that do not clean off
  • A period or roll-top bath worth keeping

Before booking anyone

  • What happens if they find more damage
  • How the colour is matched
  • How long the guarantee is and what it covers
  • When it can be used again

10 questions to ask before you book

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

How we price bath re-enamelling

Resurfacing from £350. Every quote is fixed and free. What we look at:

  • How hard the colour is to match
  • Whether we combine several jobs
  • How much damage there is
  • The material

Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Details of any past repairs
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • A photo taken from further back

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Landlords, agents and businesses in Ardler

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Ardler, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.