Dundee · Scotland
Bath Re-enamelling in St Marys
Bath re-enamelling in St Marys without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
Bath re-enamelling at your home in St Marys
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for stains that won’t shift and a coloured bath you want in white, on cast iron baths, basins & shower trays and acrylic baths.
Every job is backed for twelve months in St Marys and everywhere else. If something goes wrong with the work, we come back.
- Location
- St Marys (DD3, DD2)
- Region
- Dundee
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
After the repair has cured, a few habits help it last:
- Never use suction bath mats
- Respect the curing time we give you
- Store bottles off the bath
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we can’t put right
A repair is not right for every job, including:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Common questions in St Marys
How do I get a price for bath re-enamelling in St Marys?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for St Marys. The price reflects:
- What kind of damage it is
- Access to the area
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- The material, if you know it
- Natural light rather than flash
Most clients in St Marys get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Landlords, agents and businesses in St Marys
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around St Marys, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Also near St Marys
More services for St Marys
Our work in St Marys
St Marys is about 2 miles north-west of Dundee, in Dundee. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 50 towns and villages in Dundee. Our nearest city page is Edinburgh, about 39 miles away.
All of DD3 and DD2 is covered. Streets in the area include Troon Road, Troon Avenue and Gullane Road, all of which we cover. Close by, we cover Ardler (1 mile south), Dryburgh (1 mile south), Camperdown (1 mile south-west), Lochee (1 mile south) and Birkhill (2 miles west). Larger places within reach include Broughty Ferry (6 miles east), Stobswell (3 miles south-east), Monifieth (7 miles east), Barnhill (6 miles east), Pitkerro (3 miles east) and Whitfield (3 miles east). Being one of Dundee’s larger places, St Marys sees plenty of our work.
Local landmarks in St Marys
Locally, our jobs take us to homes close to Dundee, Balgay Hill and Cox Branch Library and the streets around them. St Marys’s nearest station is Invergowrie station, roughly 3 miles south-west. Further afield, we also cover the area around Wellgate Centre (2.6 miles south-east) and Strathmartine Castle (1.5 miles north). For a walk, there’s Balgay Hill and Trottick Mill Ponds.
What we are called out for in St Marys
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Send us a picture if you notice any of these:
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
What your quote should include
- A fixed quote, and whether VAT is included
- The length of the guarantee and what it covers
- What happens if they find more damage
- How your room will be protected
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
How it works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
