Greater London · England
Bath re-enamelling & resurfacing in Arkley, Greater London
Bath re-enamelling in Arkley without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A coloured bath you want in white
- A roll-top that is seen better days
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Arkley. The price comes down to:
- Previous DIY repairs that have to come out
- The type of damage
- Whether we combine several jobs
- How easy the damage is to reach
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
About our bath re-enamelling in Arkley
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s lots of chips and rust spots and a period or roll-top bath worth keeping, we can generally put it right, on cast iron baths, pressed steel baths and basins & shower trays alike.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Arkley (EN5, NW7)
- County
- Greater London
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Arkley
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a picture:
- Wear marks under the taps
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Questions to ask before you book
- How long the guarantee is and what it covers
- What protection goes down before work starts
- What happens if they find more damage
- How the colour is matched
Towns and villages near Arkley
Also in Arkley
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why Arkley customers choose us
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Fixed prices from your pictures
- One visit for most repairs
Read our full price list and guide to resurfacing and replacement costs.
Arkley and the surrounding area
Arkley is about 2 miles west of Barnet, in Greater London. We travel to homes and businesses in Arkley, so you do not need to take anything anywhere. We cover all 764 towns and villages across Greater London, from the larger towns to small villages. Our nearest city page is London, about 12 miles away.
Here we cover the EN5 and NW7 postcode area. From Well Road, Glebe Lane and Brett Road or anywhere nearby, a technician can come to you. Main roads around Arkley include the A411, which makes travel easy. Close by, we cover Rowley Green (1 mile north-west), High Barnet (1 mile north-east), Hadley (1 mile north-east), Totteridge (2 miles south-east) and Well End (2 miles north-west). Larger places within reach include London (12 miles south-east), City of Westminster (10 miles south), Marylebone (10 miles south), Kensington (10 miles south), St Pancras (10 miles south-east) and Shoreditch (11 miles south-east).
Landmarks near Arkley
Our customers here include homes close to Queen Elizabeth's School, The Arkley pub and St Peter's Church. Also close by are Whitings Hill Primary School (0.6 miles east), Susi Earnshaw Theatre School (1.4 miles east) and Whitings Hill Open Space (0.5 miles south-east). Arkley’s nearest station is Elstree & Borehamwood station, about 2.1 miles west. A little further out are Hertfordshire Scout Museum (1.9 miles north-west) and Barnet General Hospital (0.7 miles east). Open spaces near Arkley include Glebe Lane Pastures and Darland's Lake.
- Local facilities include Barnet Urban District (1.3 miles east)
How the visit works
The work is clean and fairly quiet. We protect the area first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
How to prepare
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Landlords, agents and businesses in Arkley
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Arkley questions
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
When a repair is not the answer
It helps to know what we cannot do too:
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
