Greater London · England
Bath re-enamelling & resurfacing in Mill Hill, Greater London
Fixed-price bath re-enamelling in Mill Hill and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- An old resurfacing that’s failing
Bath re-enamelling at your home in Mill Hill
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Our technicians work on Victorian roll-tops, cast iron baths and basins & shower trays, and people most frequently call us about a bath in a colour that no longer suits and brown or grey marks that don’t clean off.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Location
- Mill Hill (NW7, N20)
- Area hub
- Greater London
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the day after.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
- Let us know which floor the room is on
How to get a price
Email us a picture of the damage and a wider shot of the whole item, with your NW7 postcode, and we’ll reply with a fixed price.
Advice
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Your questions about bath re-enamelling in Mill Hill
Do you cover Mill Hill?
Yes, we do. We send a technician to Mill Hill for every job, and the price is the same as everywhere else.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Mill Hill and nearby
Mill Hill is about 1 mile north-east of Burnt Oak, in Greater London. We visit homes and businesses in Mill Hill and nearby villages, so you don’t need to take anything anywhere. Our repair technicians cover all 764 towns and villages in Greater London. We work right across the region, from Mill Hill to London (about 10 miles away).
We cover every part of the NW7 and N20 postcode area. That includes homes on Daws Lane, Byron Road and High Street and the roads around them. If you are just outside Mill Hill, we cover The Hale (1 mile west), Burnt Oak (1 mile south-west), Grahame Park (1 mile south), Totteridge (2 miles north-east) and Edgware (2 miles west). Within a short drive, we also cover London (10 miles south-east), City of Westminster (8 miles south-east), Marylebone (8 miles south-east), Kensington (8 miles south), St Pancras (8 miles south-east) and Shoreditch (9 miles south-east).
Landmarks near Mill Hill
In Mill Hill, that means homes near Copthall School, St Paul's CofE Primary School NW7 and Bittacy Hill Park and the streets around them. Nearby too are St Paul's Church (under half a mile north-west), Mill Hill School (within half a mile south), Rising Sun pub (0.7 miles north-west) and Francis Skaryna Belarusian Library and Museum (2 miles east). The closest station to Mill Hill is Mill Hill Broadway station, roughly 1 mile south-west of the centre. Nearby you will also find Municipal Borough of Hendon (2.2 miles south) and Francis Skaryna Belarusian Library and Museum (2 miles east). Not far away are The Mill Field and Darland's Lake.
Repair or replace in Mill Hill?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- One visit for most repairs
- No need to remove anything
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
Take a look at our pricing or resurfacing vs replacement cost guide.
What we can’t put right
We will always be straight with you, so here’s what a repair won’t do:
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Places near Mill Hill
Other services in Mill Hill
How to look after the repair
To keep it looking its best for years:
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Do you need bath re-enamelling in Mill Hill?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Look out for any of the following:
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
What to look for in a quote
- Who will actually do the work
- Whether the price covers travel
- What preparation is included
- What the guarantee covers, and for how long
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
