Hampshire · England

Bath re-enamelling & resurfacing in Ashley, Hampshire

Local bath re-enamelling for Ashley: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Ashley

Bath re-enamelling at your home in Ashley

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and common reasons people contact us are a bath in a colour that no longer suits and wear marks under the taps.

You get a one-year guarantee, the same in Ashley as everywhere else we work.

Location
Ashley (BH25, SO41)
County
Hampshire
Cover
A year, on every repair
Price
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • Anything hidden under an old coating, until we remove it
  • Leaking taps or wastes (a plumber’s job)
  • A cast iron or steel bath that is cracked right through

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths

What we’re called out for in Ashley

Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.

These are the problems we’re asked about most:

  • A roll-top that’s seen better days
  • Wear marks under the taps
  • A peeling or bubbling previous coating
  • Enamel that is lost its shine and feels rough

Comparing quotes

  • When it can be used again
  • Whether the colour is mixed to match
  • What the guarantee covers, and for how long
  • How changes to the job are handled

Choosing a repair company

Where we work around Ashley

Ashley is about 4 miles west of Lymington, in Hampshire. Jobs in Ashley are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages.

Postcode districts we cover here: BH25 and SO41. Streets in the area include Franklin Road, Miller Close and Manor Road, all of which we cover. If you are just outside Ashley, we cover New Milton (1 mile south-west), Hordle (1 mile east), Bashley (1 mile north-west), Tiptoe (1 mile north-east) and Barton on Sea (2 miles south-west). Further out, we also cover Totton (12 miles north-east), Lymington (4 miles east), Hythe (13 miles north-east), Ringwood (8 miles north-west), Dibden Purlieu (12 miles north-east) and Marchwood (12 miles north-east).

Landmarks near Ashley

Locally, our jobs take us to homes close to Ballard School, St. Peter's Church and The Plough Public House, among other places. You will also find Ashley Junior School (within half a mile south) and The Arnewood School (1.1 miles south-west). The closest station to Ashley is New Milton station, about 0.7 miles south-west of the centre. Further afield, we also cover the area around Sammy Miller Motorcycle Museum (1.4 miles west) and Lymington New Forest Hospital (4.3 miles east). Not far away are Milford on Sea LNR.

Map of Ashley © OpenStreetMap contributors

Repair or replace in Ashley?

Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why choose Surface Doctor in Ashley

  • CHAS and Constructionline accredited
  • Colours mixed by hand to suit your surface
  • Everything repaired in place
  • We’ll tell you if it’s not worth repairing

See our full price list and resurfacing vs replacement cost guide.

How it works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can normally be used the next day.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Mention any parking restrictions or tricky access
  • Ensure the room can be ventilated

Ask for a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed price

Related advice

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Repair dripping taps early
  • Stick to gentle, non-abrasive cleaners
  • Dry the bath after use to stop limescale
  • Get any chip repaired quickly

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.

Common questions in Ashley

Do you work in Ashley?

Yes. We cover the whole UK and come to Ashley and the rest of Hampshire. Send pictures and we will quote, or call 0345 017 0787.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can you make a coloured bath white?

Yes, most people go for white. Mention the colour you want when you send photos.

Which areas do you work in?

We work UK-wide. Prices do not change with location.

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

Do the materials smell?

It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.

Is there a call-out fee?

There is no separate call-out charge. Your fixed quote includes everything.

What affects the price in Ashley

Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:

  • Doing more than one item at once
  • The material
  • Previous DIY repairs that have to come out
  • How hard the colour is to match

We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • The material, if you know it
  • Where you are, by postcode

The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say right away whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.