Hampshire · England
Bath Re-enamelling in Hordle
Bath re-enamelling in Hordle without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Hordle
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix chips and rust in more than one place and a roll-top that’s seen better days, in acrylic baths, cast iron baths and pressed steel baths.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Hordle (SO41)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- The material and finish
- The colour and finish to match
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- What it’s made of, if you know
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow the best part of a day, and we’ll keep you posted as we go.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
- Ensure the area is dry
How to get a price
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
About Hordle
Hordle is about 3 miles west of Lymington, in Hampshire. Whether you’re in the middle of Hordle or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Hordle is one of 683 towns and villages in Hampshire where we work.
All of SO41 is covered, from the main roads to the quietest streets. From Yerville Gardens, Acacia Road and Woodlands or a nearby road, a technician can come to you. Close by, we cover Downton (1 mile south), Leagreen (1 mile south), Ashley (1 mile west), Tiptoe (2 miles north) and New Milton (2 miles west). Larger places within reach include Totton (12 miles north-east), Lymington (3 miles east), Hythe (12 miles north-east), Ringwood (9 miles north-west), Dibden Purlieu (11 miles north-east) and Marchwood (12 miles north-east).
Local landmarks in Hordle
Our clients here include homes close to Hordle CofE (VA) Primary School, Church of All Saints and The Arnewood School and the streets around them. For rail, the closest station is New Milton station, roughly 1.7 miles west. Well-known places in the area include Sammy Miller Motorcycle Museum (2.4 miles west) and Highcliffe Castle (4.4 miles west). Open spaces near Hordle include Milford on Sea LNR.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Your questions about bath re-enamelling in Hordle
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so let us know about it.
Do you work in Hordle?
Yes, we do. We send a technician to Hordle for every job, and the price is the same as everywhere else.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
When to call us in Hordle
Frequently the bath has just had decades of use. The body of the bath is typically perfectly sound.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- Several chips and rust patches
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
Questions to ask before you book
- What happens if the damage is worse than the photos show
- If travel is included in the price
- How soon you can use it again
- What the guarantee covers, and for how long
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Nothing taken out or refitted
- Technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
Take a look at our full price list and bath cost comparison.
What we cannot put right
It helps to know what we cannot do:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- A bath that is rusted through
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
More services for Hordle
Landlord and trade work in Hordle
We work for landlords, letting agents and housing providers in Hordle as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
