Inverclyde · Scotland
Bath re-enamelling & resurfacing in Ashton, Inverclyde
Bath re-enamelling across Ashton and nearby, typically in one visit.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Ashton
Most baths are re-enamelled in a day, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and people most often call us about worn patches where water runs and sits and an outdated colour you’d like to change.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Where
- Ashton (PA19, PA16)
- Area hub
- Inverclyde
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition:
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the next day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
When to call us in Ashton
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Clients usually contact us about:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
Before you book anyone
- How long the guarantee is and what it covers
- When it can be used again
- Whether there are any call-out or travel charges
- Who turns up on the day
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Why repair rather than replace?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Ashton
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- We leave the room as we found it
Read our pricing and guide to resurfacing and replacement costs.
Our work in Ashton
Ashton is about 2 miles west of Greenock, in Inverclyde. Anywhere in PA19, a technician comes to you. We work in 19 places across Inverclyde, from the larger towns to small villages. Our nearest city page is Glasgow, about 23 miles away.
Postcode districts we cover here: PA19 and PA16. You’ll find streets such as Fife Road, Golf Road and Banff Road, all of which we cover. Ashton is on the A770, so it’s easy for us to reach. If you are just outside Ashton, we cover Midton (1 mile north-east), Gourock (1 mile north-east), Trumpethill (1 mile west), Braeside (1 mile south-east) and Branchton (1 mile south-east). We also work in nearby towns such as Port Glasgow (6 miles east), Cartsdyke (3 miles east), Kilmacolm (9 miles south-east), Mid Auchinleck (7 miles east), Inverkip (3 miles south-west) and Bogston (5 miles east).
Landmarks near Ashton
In Ashton, that means homes near Gourock High School and Greenock. For rail, the closest station is Gourock station, roughly 1 mile north-east. Further afield, we also cover the area around Craigrownie Castle (3 miles north) and Inverclyde Royal Hospital (0.9 miles south-east). The countryside around Ashton includes Lyle Hill and Loch Loskin.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common questions in Ashton
Which areas do you work in?
The entire UK, including all of Inverclyde. Just include your postcode and we will offer you dates.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long does re-enamelling take?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Honest limits
It helps to know what we can’t do too:
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly.
Materials we work on in Ashton
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Nearby places to Ashton
Other services in Ashton
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
