Inverclyde · Scotland
Bath re-enamelling & resurfacing in Midton, Inverclyde
Local bath re-enamelling for Midton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that’s seen better days
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Midton. What changes the price is:
- How hard the colour is to match
- The material
- How easy the damage is to reach
- How much damage there is
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- What it’s made of, if you know
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Bath re-enamelling at your home in Midton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for wear marks under the taps and several chips and rust patches, in pressed steel baths, cast iron baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Midton (PA19, PA16)
- County
- Inverclyde
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Getting a price
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
When to call us in Midton
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Get in touch if you’ve noticed:
- Several chips and rust patches
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- Stains that won’t shift
Before you book anyone
- Who turns up on the day
- How the colour is matched
- How long it needs to cure
- What prep work is covered
Aftercare tips
Most damage we see is avoidable. These habits help:
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Store bottles off the bath
- Have chips seen to early
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What a repair cannot fix
Some jobs are not right for a repair, for example:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Midton and nearby
Midton is about 2 miles west of Greenock, in Inverclyde. From the centre of Midton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Midton is one of 19 towns and villages in Inverclyde where we work. Our jobs stretch from Midton to Glasgow (about 22 miles away).
Jobs in PA19 and PA16 are booked in the same way as anywhere else. Local streets include Fife Road, Golf Road and Banff Road, and we cover them all. With the A770 close by, Midton is simple for us to get to. Neighbouring places we cover include Ashton (1 mile south-west), Gourock (1 mile east), Trumpethill (1 mile west), Braeside (1 mile south) and Branchton (1 mile south-east). Within a short drive, we also cover Port Glasgow (6 miles east), Cartsdyke (3 miles east), Kilmacolm (9 miles south-east), Mid Auchinleck (7 miles east), Inverkip (3 miles south-west) and Bogston (5 miles east).
Landmarks near Midton
Around Midton, we work in homes near Gourock High School and St Bartholomew's Church. The closest station to Midton is Gourock station, about 0.8 miles north-east. Well-known places in the area include Oak Mall (2.6 miles east) and McLean Museum and Art Gallery (2.4 miles east). Green spaces nearby include Lyle Hill and Loch Loskin.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Midton as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Places near Midton
Other services in Midton
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Your questions about bath re-enamelling in Midton
It’s been repaired before. Can you still fix it?
Usually, yes. The old repair comes out first, so mention it when you send pictures.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Inverclyde.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Do you cover Midton?
Yes. We work across the UK and travel to Midton and the rest of Inverclyde. Send photos and we will quote, or call 0345 017 0787.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
About our accreditations · Every repair comes with a one-year guarantee.
