Argyll and Bute · Scotland
Bath Re-enamelling for Kilcreggan homes
Bath re-enamelling in and around Kilcreggan: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
How we handle bath re-enamelling in Kilcreggan
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on pressed steel baths, basins & shower trays and acrylic baths, and the jobs we see most are an old resurfacing that’s failing and worn patches where water runs and sits.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Kilcreggan (G84)
- Area hub
- Argyll and Bute
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Kilcreggan questions
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How much does bath re-enamelling cost in Kilcreggan?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.
Other services in Kilcreggan
What we are called out for in Kilcreggan
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
If you can see any of these, send us a picture:
- A roll-top that’s seen better days
- Worn patches where water runs and sits
- Several chips and rust patches
- Brown or grey marks that don’t clean off
Before you book anyone
- What prep work is covered
- Whether the price covers travel
- Aftercare advice
- How changes to the job are handled
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Respect the curing time we give you
- Never use suction bath mats
- Store bottles off the bath
- Fix dripping taps quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a full day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Clear the area around the damage
- Keep a parking space free if you can
- Ensure the room can be ventilated
Get a quote
Send us pictures of the damage and one of the entire item, and tell us you’re in Kilcreggan, and we’ll reply with a fixed price.
Read more
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- Same prices wherever you are
Take a look at our pricing and bath cost comparison.
Honest limits
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Landlords, agents and businesses in Kilcreggan
We carry out planned and one-off repairs for housing associations and facilities teams in Argyll and Bute and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Kilcreggan and the surrounding area
Kilcreggan is about 4 miles north-west of Greenock, in Argyll and Bute. Anywhere in G84, we come to you. Kilcreggan is one of 118 places in Argyll and Bute where we work. You can also see our page for Glasgow, about 23 miles away.
We cover every part of G84. You’ll find streets such as Church Road, Barbour Road and Argyll Road. We also travel to Gourock (2 miles south), Midton (2 miles south), Ashton (3 miles south), Blairmore (3 miles west) and Trumpethill (3 miles south). Within a short drive, we also cover Helensburgh (4 miles east), Dunoon (4 miles south-west), Rothesay (14 miles south-west), Rhu (3 miles north-east), Garelochhead (7 miles north) and Port Bannatyne (13 miles south-west).
Local landmarks in Kilcreggan
In Kilcreggan, that means homes near Gourock High School and Craigrownie Parish Church, among other places. Kilcreggan’s nearest station is Gourock station, about 1.9 miles south of the centre. Nearby you’ll also find McLean Museum and Art Gallery (3.5 miles south-east) and Inverclyde Royal Hospital (3.1 miles south). Open spaces near Kilcreggan include Loch Loskin and Lyle Hill.
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Kilcreggan. What changes the price is:
- How much damage there is
- Access to the area
- The material and finish
- The colour and finish to match
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from photos
When you take your pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
