Shropshire · England
Bath re-enamelling & resurfacing in Aston, Shropshire
Bath re-enamelling in Aston without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
How we handle bath re-enamelling in Aston
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair acrylic baths, cast iron baths and Victorian roll-tops, and common reasons people get in touch are a period or roll-top bath worth keeping and enamel that’s lost its shine and feels rough.
Every repair is covered by a one-year guarantee.
- Location
- Aston (SY4)
- Area hub
- Shropshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Once the work has cured, treat it gently:
- Stick to gentle, non-abrasive cleaners
- Don’t leave a chip unrepaired
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Aston and nearby
Aston is about 8 miles south of Whitchurch, in Shropshire. Customers in Aston get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Aston is one of 433 towns and villages in Shropshire we cover. You can also see our page for Liverpool, about 39 miles away.
Our visits in SY4 are booked in the same way as anywhere else. Local streets include Weir Lane, Aston Road and Church Lane, all of which we cover. We also travel to Lee Brockhurst (1 mile south-east), Weston-under-Redcastle (2 miles east), Preston Brockhurst (2 miles south), Prees Green (3 miles north-east) and Prees (3 miles north-east). We also work in nearby towns such as Shrewsbury (10 miles south), Oswestry (15 miles west), Market Drayton (9 miles east), Coleham (11 miles south), Kingsland (10 miles south) and Whitchurch (8 miles north).
Landmarks near Aston
Around Aston, we work in homes near Church of St Peter and St Paul, St Peter's CofE Primary School and The Albion Public House And Adjoining Stables To East and the streets around them. You’ll also find Wem Rec (0.9 miles west), Thomas Adams School (1.4 miles west) and Thomas Adams School (1.4 miles west). Aston’s nearest station is Wem station, roughly 0.9 miles west of the centre. A little further out are Morgan Library (1 mile west) and Soulton Hall Moat (1.4 miles north-east). Open spaces near Aston include Hawk Lake.
- Other local spots include North Shropshire (1 mile west)
Places near Aston
Also in Aston
Aston questions
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Are there extra charges for Aston?
No. Our quotes include travel, and we charge the same wherever you are.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What happens after I send photos?
We review the pictures and send a fixed quote with dates.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Whether we combine several jobs
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
Most customers in Aston get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What we are called out for in Aston
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a photo:
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
Comparing quotes
- Whether there are any call-out or travel charges
- Who will actually do the work
- How changes to the job are handled
- What the guarantee covers, and for how long
Honest limits
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
The process
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
Getting a price
For a price in Aston, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Why repair rather than replace?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Aston customers choose us
- Everything repaired in place
- A fixed quote before you book
- We come to you, anywhere in the UK
- No extra charge for your area
See our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
