West Lothian · Scotland
Bath re-enamelling & resurfacing in Auldcathie, West Lothian
Damaged bath in Auldcathie? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
About Auldcathie
Auldcathie is about 3 miles south-west of Queensferry, in West Lothian. Across the EH52 area, we come to you. Auldcathie is one of 58 places in West Lothian we cover. Our jobs stretch from Auldcathie to Edinburgh (11 miles away).
Our repair technicians cover all of the EH52 postcode area. Jobs here include addresses on Fleming Lane, Church Avenue and Millcraig Road and the roads around them. We also travel to Winchburgh (1 mile south-east), Woodend (1 mile north-east), Newton (1 mile north-east), Abercorn (2 miles north) and Broxburn (2 miles south). Further out, we also cover Livingston (5 miles south), Bathgate (8 miles south-west), Linlithgow (5 miles west), Whitburn (11 miles south-west), East Calder (5 miles south) and Armadale (10 miles south-west).
Near you in Auldcathie
Locally, our jobs take us to homes close to Winchburgh Academy and Auldcathie Church. The closest station to Auldcathie is Uphall station, about 3.5 miles south of the centre. Well-known places in the area include Hopetoun House (2 miles north) and Broxburn Community Museum (2.5 miles south). Open spaces near Auldcathie include Dechmont Law and Dundas Loch.
How we handle bath re-enamelling in Auldcathie
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We work on Victorian roll-tops, cast iron baths and basins & shower trays, and common reasons people get in touch are an original cast iron bath that needs restoring and worn patches where water runs and sits.
A one-year guarantee comes as standard.
- Location
- Auldcathie (EH52)
- Area hub
- West Lothian
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Questions from Auldcathie
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Places near Auldcathie
What else we do in Auldcathie
What we cannot put right
In fairness, there are a few things a repair will not fix:
- A bath split right through the body
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- Whether we combine several jobs
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Access to the area
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your photos
Before you send pictures, these tips help us give you a firm price:
- A photo taken from further back
- Details of any past repairs
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Work for landlords and builders
Landlords, letting agents and housing providers in Auldcathie use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
How it works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Keeping it looking good
How the surface is treated afterwards matters:
- Don’t leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Signs you need bath re-enamelling in Auldcathie
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Most people contact us when they notice something like this:
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
- Brown or grey marks that do not clean off
- A roll-top that’s seen better days
Before you book anyone
- When it can be used again
- Whether the price covers travel
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
