Edinburgh · Scotland
Bath Re-enamelling for Abercorn homes
Full bath re-enamelling and resurfacing in Abercorn, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Stains that won’t shift
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
How to get a price
Send us a photo of the damage and a wider shot of the entire item, with your EH30 postcode, and we will come back with a fixed quote.
Advice
Bath re-enamelling at your home in Abercorn
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s brown or grey marks that don’t clean off and a coloured bath you want in white, we can help, on acrylic baths, basins & shower trays and Victorian roll-tops alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Area
- Abercorn (EH30)
- Area hub
- Edinburgh
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Abercorn
What else we do in Abercorn
When to call us in Abercorn
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Common reasons people in Abercorn contact us are:
- Staining under the taps and around the waste
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
Before booking anyone
- What the guarantee covers, and for how long
- If travel is included in the price
- Aftercare advice
- Whether cleaning and preparation are in the price
Repairing versus replacing in Abercorn
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Abercorn
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
- Normally one visit, start to finish
- Work done at your home or business
Read our pricing or resurfacing vs replacement cost guide.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Edinburgh and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What we can’t put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- Holes rusted through the metal
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Aftercare tips
Simple care helps the repair last. Our advice:
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Covering Abercorn
Abercorn is about 3 miles west of Queensferry, in Edinburgh. Whether you are in the middle of Abercorn or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Abercorn is one of 175 towns and villages in Edinburgh where we work. You can also see our page for Edinburgh, about 11 miles away.
Here we cover the EH30 postcode area. Close by, we cover Newton (1 mile south-east), Woodend (1 mile south-east), Auldcathie (2 miles south), Winchburgh (2 miles south) and Kirkliston (4 miles south-east). We also work in nearby towns such as Edinburgh (11 miles east), Leith (12 miles east), Bonnington (12 miles east), Greenside (12 miles east), Broughton (11 miles east) and Bellevue (11 miles east).
Local landmarks in Abercorn
We visit homes around Abercorn Church and Winchburgh Academy. The nearest railway station is North Queensferry station, about 3.3 miles east. Other landmarks nearby include Hopetoun House (0.5 miles east) and Queensferry Museum (3.2 miles east). Open spaces near Abercorn include Dundas Loch.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Abercorn questions
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
What areas do you cover?
Across the UK, so Abercorn is covered. Our prices are the same everywhere.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote and the next dates we have.
Do you work in Abercorn?
We do. We send a technician to Abercorn for every job, with no extra charge for travel.
About our accreditations · Every repair comes with a one-year guarantee.
