Gloucestershire · England
Bath re-enamelling & resurfacing in Arlingham, Gloucestershire
Bath re-enamelling across Arlingham and nearby, usually in one visit.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
Bath re-enamelling at your home in Arlingham
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a coloured bath you want in white and wear marks under the taps, on basins & shower trays, pressed steel baths and cast iron baths.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Arlingham (GL2)
- County
- Gloucestershire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
- Do not leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.
Why Arlingham customers choose us
- We come to you, anywhere in the UK
- One price list for the entire UK
- Most jobs done in one visit
- A fixed quote before you book
Take a look at our prices page and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Nearby places to Arlingham
More services for Arlingham
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Questions from Arlingham
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is there any odour?
Expect a mild smell while we are working.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Problems we cannot see until an old finish comes off
- A bath that’s rusted through
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Arlingham
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
- Point us to the nearest place to park
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
What affects the price in Arlingham
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- How hard the colour is to match
- How much damage there is
- Where the damage is and how we get to it
- Doing more than one item at once
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- What it’s made of, if you know
- Something in shot to show the size
- A wider photo showing the whole bath
- A clear, close picture of the problem area
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Do you need bath re-enamelling in Arlingham?
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Look out for these signs:
- Stains that will not shift
- A coating lifting around the plughole
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
Questions to ask before you book
- Whether a trained technician does the job
- Whether they match the colour on site
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
About Arlingham
Arlingham is about 6 miles west of Quedgeley, in Gloucestershire. Across the GL2 area, we carry out the work at your property. Arlingham is one of 470 towns and villages in Gloucestershire where we work. We work right across the region, from Arlingham to Birmingham (about 52 miles away).
All of GL2 is within our area. Jobs here include addresses on High Street, Church Road and Friday Street and the roads around them. Neighbouring places we cover include Awre (2 miles south), Bledisloe (2 miles south-west), Ayleford (3 miles south-west), Upper Soudley (3 miles west) and Blakeney (4 miles south-west). Further out, we also cover Gloucester (9 miles north-east), Stroud (9 miles south-east), Brockworth (11 miles east), Quedgeley (6 miles east), Lydney (7 miles south-west) and Innsworth (12 miles north-east).
Around Arlingham
Typical jobs here are in homes near Arlingham Free Church and The Red Lion pub and the streets around them. A little further out are Bledisloe Tump (2.6 miles south-west) and Dilke Memorial Hospital (4.3 miles west). Green spaces nearby include WWT Slimbridge.
About our accreditations · Every repair comes with a one-year guarantee.
