Herefordshire · England

Bath Re-enamelling in Aymestrey

Bath re-enamelling in Aymestrey without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Aymestrey

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Bath re-enamelling in Aymestrey, done in place

Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Typical jobs include a bath that stays dull however much you clean it and an old resurfacing that’s failing, across Victorian roll-tops, pressed steel baths and cast iron baths.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Area
Aymestrey (HR6)
County
Herefordshire
Warranty
One year on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

What a repair cannot fix

Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:

  • Problems we can’t see until an old finish comes off
  • A bath split right through the body
  • Steel that has corroded right through

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths

Work for landlords and builders

Landlords, letting agents and housing providers in Aymestrey use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work
  • Have somewhere for us to park nearby if possible

Getting a price

To get a price, send a couple of pictures through our quote form or ring us. We’ll say right away whether it can be repaired.

Get a fixed quote

Related advice

Questions from Aymestrey

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

How long is the bath unusable?

Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Do you cover Aymestrey?

Yes, we do. Technicians travel to Aymestrey from across the region, with no extra charge for travel.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so mention it when you send photos.

What do you need from me?

Send pictures through the quote form or call 0345 017 0787.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Aymestrey and the surrounding area

Aymestrey is about 16 miles north of Hereford, in Herefordshire. We travel to homes and businesses in Aymestrey and the surrounding area, so nothing has to leave your home. Our repair technicians cover 255 places across Herefordshire. Our nearest city page is Birmingham, about 42 miles away.

Every address in HR6 is covered, from the main roads to the quietest streets. Nearby, we also work in Lucton (1 mile south-east), Mortimer's Cross (1 mile south), Kingsland (2 miles south-east), Shobdon (3 miles south-west) and Cobnash (3 miles south-east). Larger places within reach include Leominster (6 miles south-east), Bromyard (15 miles south-east), Kington (9 miles south-west), Bobblestock (15 miles south), Holmer (15 miles south) and Credenhill (13 miles south).

What’s near Aymestrey

Typical jobs here are in homes near Riverside Inn and Church of St John the Baptist and St Alkmund. Nearby you will also find Croft Castle (1.6 miles east). Open spaces near Aymestrey include Dionscourt Hill.

Map of Aymestrey © OpenStreetMap contributors

What your bath is made of matters

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

What affects the price in Aymestrey

Prices start from £350. You’ll know the full cost before booking. We take into account:

  • Whether old repairs or coatings need taking off
  • How many areas need work
  • How many items we do on one visit
  • How easy the damage is to reach

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.

Getting a price from photos

The better the photos, the more accurate the price. Here’s what helps:

  • A picture taken from further back
  • Any details about the material
  • Natural light rather than flash
  • One sharp close-up of the damage

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Looking after it afterwards

To keep it looking its best:

  • Keep toiletries on a shelf rather than in the bath
  • Dry the bath after use to stop limescale
  • Get any chip repaired quickly
  • Stick to gentle, non-abrasive cleaners

Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.

Don’t try to scrub a worn bath back to shine. It removes more of the surface.

Do you need bath re-enamelling in Aymestrey?

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.

You may need us if you’ve spotted any of these:

  • An old resurfacing that is failing
  • A coloured bath you want in white
  • Chips and rust in more than one place
  • An original cast iron bath that needs restoring

Questions to ask before booking

  • How the room is protected while they work
  • Whether a trained technician does the job
  • If travel is included in the price
  • How long it needs to cure

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.