Herefordshire · England

Bath Re-enamelling for Mortimer's Cross homes

Bath re-enamelling in and around Mortimer's Cross: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Mortimer's Cross homes

What affects the price in Mortimer's Cross

Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:

  • How easy the damage is to reach
  • What the surface is made of
  • The size and number of damaged areas
  • Previous DIY repairs that have to come out

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Getting a price from pictures

Phone pictures are fine. Just ensure we can see:

  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Natural light rather than flash
  • One picture of the whole bath

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Bath re-enamelling at your home in Mortimer's Cross

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about stains that won’t shift and worn patches where water runs and sits.

Your repair is guaranteed for a year, as with every job we do.

Area
Mortimer's Cross (HR6)
Area hub
Herefordshire
Cover
One year on every repair
Quotes
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

Mortimer's Cross and nearby

Mortimer's Cross is about 15 miles north of Hereford, in Herefordshire. From the centre of Mortimer's Cross to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Mortimer's Cross is one of 255 places in Herefordshire we cover. We work right across the region, from Mortimer's Cross to Birmingham (43 miles away).

Our visits in HR6 are booked in the same way as anywhere else. We also cover the places around Mortimer's Cross: Lucton (1 mile north-east), Aymestrey (1 mile north), Kingsland (2 miles south-east), Shobdon (2 miles south-west) and Cobnash (2 miles south-east). Larger places within reach include Hereford (15 miles south), Leominster (5 miles south-east), Whitecross (15 miles south), Widemarsh (15 miles south), Bromyard (15 miles east) and Kington (9 miles south-west).

What’s near Mortimer's Cross

We visit homes around Mortimers' Cross Inn and Church of St John the Baptist and St Alkmund. Other landmarks nearby include Shobdon 2 (1.1 miles west). The countryside around Mortimer's Cross includes Dionscourt Hill.

Map of Mortimer's Cross © OpenStreetMap contributors

How to care for the repair

Good habits make a big difference to how long a repair lasts:

  • Avoid suction-cup mats
  • A dripping tap should be fixed promptly
  • Dry the bath after use to stop limescale
  • Get any chip repaired quickly

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

FAQs for Mortimer's Cross

How do I get a price for bath re-enamelling in Mortimer's Cross?

Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Does re-enamelling smell?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do the materials smell?

There may be a mild smell during the work that clears as it cures.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.

What happens on the day

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes a full day, and we will tell you if anything changes.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Have a window or extractor fan available
  • Tell us if there are stairs or a lift
  • Keep a parking space free if you can

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a fixed price

Related advice

Common problems we fix in Mortimer's Cross

Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.

Common reasons people in Mortimer's Cross contact us are:

  • Enamel that’s lost its shine and feels rough
  • Lots of chips and rust spots
  • Wear marks under the taps
  • Staining under the taps and around the waste

What to look for in a quote

  • How long it needs to cure
  • If travel is included in the price
  • What preparation is included
  • How the colour is matched

How to compare quotes

Landlord and trade work in Mortimer's Cross

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.

When a repair isn’t the answer

To be straight with you, some problems need a different fix:

  • Anything hidden under an old coating, until we remove it
  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through

Not sure? Send photos and we’ll give you a straight answer.

Materials we work on in Mortimer's Cross

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths

Repairing versus replacing in Mortimer's Cross

Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why Mortimer's Cross customers choose us

  • No need to remove anything
  • Fixed prices from your photos
  • No extra charge for your area
  • CHAS, Constructionline and SafeContractor accredited

Read our pricing or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.