Herefordshire · England

Bath re-enamelling & resurfacing in Shirl Heath, Herefordshire

Full bath re-enamelling and resurfacing at your home in Shirl Heath, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Shirl Heath

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.

Bath re-enamelling in Shirl Heath, done in place

Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Whether it’s worn patches where water runs and sits and lots of chips and rust spots, we can usually put it right, on basins & shower trays, cast iron baths and acrylic baths alike.

Big or small, you get the same one-year guarantee in Shirl Heath and across Herefordshire.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Shirl Heath (HR6)
Region
Herefordshire
Warranty
A year, on every repair
Quote
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Keeping it looking good

To keep it looking its best for years:

  • Clean with a soft cloth and mild detergent
  • Have chips seen to early
  • Wipe the bath dry after use in hard water areas
  • Keep toiletries on a shelf rather than in the bath

Dry the bath after use if possible, and rinse off any bath products.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Questions from Shirl Heath

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

Which areas do you work in?

The entire UK, including all of Herefordshire. Send your postcode with your photos and we will offer you dates.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so the tiles and taps stay put.

What information do you need?

Just photos, your postcode and a contact number. On the day, access to the room.

What happens after I send photos?

You will get a fixed quote back, plus dates. There’s no obligation to book.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Does re-enamelling smell?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

What a repair cannot fix

Some jobs aren’t right for a repair, for example:

  • A metal bath with a through crack
  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths

The process

Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and we start. It normally takes the best part of a day, and we will tell you if anything changes.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Point us to the nearest place to park
  • Let the surface dry out before the visit
  • Make sure the room can be ventilated

Ask for a price

The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.

Get a free quote

Advice

Shirl Heath and nearby

Shirl Heath is about 13 miles north of Hereford, in Herefordshire. Our technicians come to customers in Shirl Heath, so nothing has to leave your home. Our repair technicians cover all 255 towns and villages across Herefordshire, from the larger towns to small villages. Our jobs stretch from Shirl Heath to Birmingham (43 miles away).

Postcode districts we cover here: HR6. We also cover the places around Shirl Heath: Cobnash (1 mile north-east), Eardisland (1 mile south-west), Kingsland (1 mile north), Mortimer's Cross (2 miles north) and Shobdon (3 miles north-west). Further out, we also cover Hereford (13 miles south), Leominster (4 miles east), Redhill (14 miles south), Newton Farm (14 miles south), Whitecross (12 miles south) and Eign Hill (13 miles south-east).

What’s near Shirl Heath

Typical jobs here are in homes near Church of St Mary, among other places. The nearest railway station is Leominster station, roughly 4.1 miles east. Other landmarks nearby include Eardisland Castle (1.1 miles south-west).

Map of Shirl Heath © OpenStreetMap contributors

Should you replace it?

If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Shirl Heath

  • Everything repaired in place
  • One-year guarantee on every repair
  • Usually one visit, start to finish
  • A fixed quote before booking

Take a look at our pricing or resurfacing vs replacement cost guide.

How we price bath re-enamelling

Resurfacing from £350. We price every job individually. What matters most is:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • Access to the area
  • Unusual colours or finishes

We charge the same wherever you are, so there’s no premium for Shirl Heath. The job itself decides the price: how much damage, what it’s made of and how many items.

How to get a fixed quote

It only takes a minute to photograph the damage. Please include:

  • Something in shot to show the size
  • What it’s made of, if you know
  • A clear, close picture of the problem area
  • Natural light rather than flash

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you’re under no obligation.

When to call us in Shirl Heath

Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.

The things clients normally mention when they call are:

  • Wear marks under the taps
  • Staining under the taps and around the waste
  • Lots of chips and rust spots
  • A roll-top that is seen better days

Comparing quotes

  • How changes to the job are handled
  • What prep work is covered
  • How long the guarantee is and what it covers
  • Whether the price covers travel

10 questions to ask before you book

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.